Republic Lagun | Drill Press Machine

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Standard Features

Manual Feed (models TS)
Automatic Feed (models TSA)
Spindle and quill housing of Hi-tensile steel hardened and ground.
Speed connection and selection from general switch
Selector for turning direction
Automatic tool ejector
Working Table with 2 e/a “T” slots, with rotation around the column.. Hardened surface.
Table Vertically adjustable, by manual command (pinion and rack)
CE safety rules, with protection in the working area and the necessary electrical protections
Morse taper No.: 3 with threaded nose and protection nut.
Geared Drive with top quality steel gears and arbors treated and grounded.
Top quality steel main spindle/toothing quill, fully treated and grounded (exterior, interior, grooves and teeth).
Measuring front rule, with adjustable depth limit and reading index.
Emergency push button
Motor guard.
Base plate with “T” slots. Hardened surface.
Coolant system built in the base. (R= models only)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

SPECIFICATION	25-TS	25-TSR	25-TSA	25-TSAR
Maximum drilling capacity in steel 154.3 lbs (70 Kgs)	1” (25 mm)	1” (25 mm)	1” (25 mm)	1” (25 mm)
Maximum drilling capacity in cast-iron 200 Br.	1 3/16” (30 mm)	1 3/16” (30 mm)	1 3/16” (30 mm)	1 3/16” (30 mm)
Maximum tapping capacity in steel 154.3 lbs (70 Kgs)	7/8” (M.22)	7/8” (M.22)	7/8” (M.22)	7/8” (M.22)
Maximum tapping capacity in cast-iron 200 Br.	15/16” (M.24)	15/16” (M.24)	15/16” (M.24)	15/16” (M.24)
Morse taper No.	3	3	3	3
Maximum drilling depth	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)
Maximum tapping depth	3 35/64” (90 mm)	3 35/64” (90 mm)	3 35/64” (90 mm)	3 35/64” (90 mm)
Main motor 1500/300 rpm (STD.)	1.1/1.6 HP	1.1/1.6 HP	1.1/1.6 HP	1.1/1.6 HP
Standard speeds 50 Hz. - 65/3060 rpm	65-125-185-365-540-1055-1560-3060
Standard speeds 60 Hz. - 78/3672 rpm	78-150-222-438-648-1266-1872-3672
Motor 750/1500 rpm (upon request)	0.68/1.4 HP	0.68/1.4 HP	0.68/1.4 HP	0.68/1.4 HP
Speeds 50 Hz. (upon request)	30-60-90-180-260-520-750-1500
Speeds 60 Hz. (upon request)	36-72-108-216-312-624-900-1800
Drilling feed	MANUAL	MANUAL
Automatic drilling feed	-	-	.0039”-.0078” (.10-.20 mm)	.0039”-.0078” (.10-.20 mm)
Motor pump cooling of	NO	YES	NO	YES
Automatic tool ejector	YES	YES	YES	YES
Approx. machine weight	573 lbs (260 Kgs)	573 lbs (260 Kgs)	573 lbs (260 Kgs)	573 lbs (260 Kgs)
Gross weight with packaging	705 lbs (320 Kgs)	705 lbs (320 Kgs)	705 lbs (320 Kgs)	705 lbs (320 Kgs)
Dimensions W; D; H (Model TS)	31.5”x 23.63”x 84.25” (800 x 600 x 2140 mm)		31.5”x 26”x 89.2” (800 x 660 x 2266 mm)
Volume	36.37 ft3 (1.03m3)	36.37 ft3 (1.03m3)	36.37 ft3 (1.03m3)	36.37 ft3 (1.03m3)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

SPECIFICATION	30-TS	30-TSR	30-TSA	30-TSAR
Maximum drilling capacity in steel 154.3 lbs (70 Kgs)	1 3/16” (30 mm)	1 3/16” (30 mm)	1 3/16” (30 mm)	1 3/16” (30 mm)
Maximum drilling capacity in cast-iron 200 Br.	1 1/4” (32 mm)	1 1/4” (32 mm)	1 1/4” (32 mm)	1 1/4” (32 mm)
Maximum tapping capacity in steel 154.3 lbs (70 Kgs)	1” (M.25)	1” (M.25)	1” (M.25)	1” (M.25)
Maximum tapping capacity in cast-iron 200 Br.	1 7/64” (M.28)	1 7/64” (M.28)	1 7/64” (M.28)	1 7/64” (M.28)
Morse taper No.	3	3	3	3
Maximum drilling depth	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)
Maximum tapping depth	3 35/64” (90 mm)	3 35/64” (90 mm)	3 35/64” (90 mm)	3 35/64” (90 mm)
Main motor 1500/300 rpm (STD.)	1.5/1.9 HP	1.5/1.9 HP	1.5/1.9 HP	1.5/1.9 HP
Standard speeds 50 Hz. - 65/3060 rpm	65-125-185-365-540-1055-1560-3060
Standard speeds 60 Hz. - 78/3672 rpm	78-150-222-438-648-1266-1872-3672
Motor 750/1500 rpm (upon request)	0.95/1.8 HP	0.95/1.8 HP	0.95/1.8 HP	0.95/1.8 HP
Speeds 50 Hz. (upon request)	30-60-90-180-260-520-750-1500
Speeds 60 Hz. (upon request)	36-72-108-216-312-624-900-1800
Drilling feed	MANUAL	MANUAL
Automatic drilling feed			.0039”-.0078” (.10-.20 mm)	.0039”-.0078” (.10-.20 mm)
Motor pump cooling of	NO	YES	NO	YES
Automatic tool ejector	YES	YES	YES	YES
Approx. machine weight	573 lbs (260 Kgs)	573 lbs (260 Kgs)	573 lbs (260 Kgs)	573 lbs (260 Kgs)
Gross weight with packaging	705 lbs (320 Kgs)	705 lbs (320 Kgs)	705 lbs (320 Kgs)	705 lbs (320 Kgs)
Dimensions W; D; H (Model TS)	31.5”x 23.63”x 84.25” (800 x 600 x 2140 mm)		31.5”x 26”x 89.2” (800 x 660 x 2266 mm)
Volume	36.37 ft3 (1.03 m3)	36.37 ft3 (1.03 m3)	36.37 ft3 (1.03 m3)	36.37 ft3 (1.03 m3)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

SPECIFICATION	32-TS	32-TSR	32-TSA	32-TSAR
Maximum drilling capacity in steel 154.3 lbs (70 Kgs)	1 ¼” (32 mm)	1 ¼” (32 mm)	1 ¼” (32 mm)	1 ¼” (32 mm)
Maximum drilling capacity in cast-iron 200 Br.	1 3/8” (35 mm)	1 3/8” (35 mm)	1 3/8” (35 mm)	1 3/8” (35 mm)
Maximum tapping capacity in steel 154.3 lbs (70 Kgs.)	1 7/64” (M.28)	1 7/64” (M.28)	1 7/64” (M.28)	1 7/64” (M.28)
Maximum tapping capacity in cast-iron 200 Br.	1 3/16” (M. 30)	1 3/16” (M. 30)	1 3/16” (M. 30)	1 3/16” (M. 30)
Morse taper No.	4	4	4	4
Maximum drilling depth	6 19/64” (160 mm)	6 19/64” (160 mm)	6 19/64” (160 mm)	6 19/64” (160 mm)
Maximum tapping depth	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)
Main motor	1/1.5 HP	1/1.5 HP	1/1.5 HP	1/1.5 HP
Standard speeds 50 Hz. - 750/1500 rpm	75-150-235-325-470-650-1050-2100
Standard speeds 60 Hz. - 750/1500 rpm	90-180-282-390-564-780-1260-2520
Drilling feed	Manual	Manual
Drilling feed (mechanical clutch)			.0039”-.0078”-.0118” (.10-.20-.30 mm)
Drilling feed (electromagnetic clutch)			.0039”-.0078”-.0118” (.10-.20-.30 mm)
Motor pump cooling of		0.10 HP		0.10 HP
Weight admitted by worktable	396.8 lbs (180 Kgs)	396.8 lbs (180 Kgs)	396.8 lbs (180 Kgs)	396.8 lbs (180 Kgs)
Approx. machine weight	584.2 lbs (265 Kgs)		665.8 lbs (302 Kgs)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

SPECIFICATION	35-TS	35-TSR	35-TSA	35-TSAR
Maximum drilling capacity in steel 154.3 lbs (70 Kgs)	1 3/8” (35 mm)	1 3/8” (35 mm)	1 3/8” (35 mm)	1 3/8” (35 mm)
Maximum drilling capacity in cast-iron 200 Br.	1 1/2” (38 mm)	1 1/2” (38 mm)	1 1/2” (38 mm)	1 1/2” (38 mm)
Maximum tapping capacity in steel 154.3 lbs (70 Kgs.)	1 7/64” (M.28)	1 7/64” (M.28)	1 7/64” (M.28)	1 7/64” (M.28)
Maximum tapping capacity in cast-iron 200 Br.	1 3/16” (M. 30)	1 3/16” (M. 30)	1 3/16” (M. 30)	1 3/16” (M. 30)
Morse taper No.	4	4	4	4
Maximum drilling depth	6 19/64” (160 mm)
Maximum tapping depth	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)	4 47/64” (120 mm)
Main motor	1.2/2 HP	1.2/2 HP	1.2/2 HP	1.2/2 HP
Standard speeds 50 Hz. - 750/1500 rpm	75-150-235-325-470-650-1050-2100
Standard speeds 60 Hz. - 750/1500 rpm	90-180-282-390-564-780-1260-2520
Drilling feed	Manual	Manual
Drilling feed (mechanical clutch)			.0039”-.0078”-.0118” (.10-.20-.30 mm)
Drilling feed (electromagnetic clutch)			.0039”-.0078”-.0118” (.10-.20-.30 mm)
Motor pump cooling of		0.10 HP		0.10 HP
Weight admitted by worktable	396.8 lbs (180 Kgs)	396.8 lbs (180 Kgs)	396.8 lbs (180 Kgs)	396.8 lbs (180 Kgs)
Approx. machine weight	617.3 lbs (280 Kgs)		698.9 lbs (317 Kgs)
Gross weight with packaging	837.8 lbs (380 Kgs)		919.3 lbs (417 Kgs)
Dimensions	39 3/8” x 23 5/8” x 94 31/64” (1000 x 600 x 2400 mm)
Volume	4.7 ft3 (1.44 m3)	4.7 ft3 (1.44 m3)	4.7 ft3 (1.44 m3)	4.7 ft3 (1.44 m3)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

SPECIFICATION	40-TSAR
Maximum drilling capacity in steel 154.3 lbs (70 Kgs)	1 4/7” (40 mm)
Maximum tapping capacity in steel 154.3 lbs (70 Kgs.)	1 1/4” (M.32)
Morse taper No.	4
Maximum drilling depth	7” (180 mm)
Maximum tapping depth	7” (180 mm)
Main motor	2 HP
Standard speeds 50 Hz. - 750/1500 rpm	93-134-204-298-443-635-970-1420
Standard speeds 60 Hz. - 750/1500 rpm	112-161-245-358-532-762-1164-1704
Drilling feed number	3
Drilling feed range	.0039”-.0071”-.0095” (.10-.18-.24 mm)
Motor pump cooling of	0.10 HP
Weight admitted by worktable	441 lbs (200 Kgs)
Approx. machine weight	959 lbs (435 Kgs)
Gross weight with packaging	1,246 lbs (565 Kgs)
Dimensions	41 1/3” x 26 10/13” x 98 17/40” (1050 x 680 x 2500 mm)
Volume	5.9 ft3 (1.79 m3)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

SPECIFICATION	45-TSAR
Maximum drilling capacity in steel 154.3 lbs (70 Kgs)	1 27/35” (45 mm)
Maximum tapping capacity in steel 154.3 lbs (70 Kgs.)	1 3/8” (M.35)
Morse taper No.	4
Maximum drilling depth	7” (180 mm)
Maximum tapping depth	7” (180 mm)
Main motor	3 HP
Standard speeds 50 Hz. - 750/1500 rpm	93-134-204-298-443-635-970-1420
Standard speeds 60 Hz. - 750/1500 rpm	112-161-245-358-532-762-1164-1704
Drilling feed number	3
Drilling feed range	.0039”-.0071”-.0095” (.10-.18-.24 mm)
Motor pump cooling of	0.10 HP
Weight admitted by worktable	441 lbs (200 Kgs)
Approx. machine weight	959 lbs (435 Kgs)
Gross weight with packaging	1,246 lbs (565 Kgs)
Dimensions	41 1/3” x 26 10/13” x 98 17/40” (1050 x 680 x 2500 mm)
Volume	5.9 ft3 (1.79 m3)

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD Series

Complete Product Details & Parts

Get a Quote [+]

Key Features

Videos

Item Brochure

Lease Calculator

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

Drill Press Machine Republic RFD SeriesAuto Toll Eject

All Rights Reserved © 2010 - 2011 www.lagun.com