Republic Lagun | Heavy Duty AT-P5 Series

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

One piece (monolithic) bed, floor type casting
Three bedway design, with extra way on front face of base supporting the apron.
All three ways are hardened and ground
Forged steel spindle with opposed taper roller bearings
Dual chucks are optionally available
Hardened and ground gears and shafts throughout
Hardened and ground cross slide ways and screw
Electromagnetic spindle brake
Universal inch / metric gear box, totally enclosed
18 speed geared headstock
Six way rapid traverse and power feed to top slide
Thread chasing dial
Overload safety device on apron
Dual voltage motor and controls, 30 HP

Standard Equipment for all AT-P5 Models

6 way rapid traverse
Top slide with auto geared feed for tapers
Heavy duty square tool post
2-speed tailstock
Automatic lubrication to ways and screws
Flood coolant system
Halogen work light

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

SPECIFICATION	45 Series
Swing over bed	45” (1135mm)
Swing over Cross slide	32” (810 mm)
Swing over gap	65 (1650 mm)
Gap length	23.75” (603.25 mm)
Center to center	60&rdquo to 800&rdquo (1524 mm to 20320 mm)
Type casting	One piece (monolithic) bed floor type
Bed way design	3 e/a with extra ways supporting apron
Bed width	28” / 32” (711 mm / 812 mm)
Spindle bore, standard	6.02” (153 mm)
Spindle nose, standard	A2-11
Optional	See options
Spindle speeds, number	18
Spindle speed range	18 To 1000 RPM (6” / 150 mm bore)
Main drive motor	30 HP (22.47 kW)
Optional	40 HP or 50 HP
Travel, cross slide	31.50” (800 mm)
Travel, top slide (power)	15.75” (400 mm)
Leadscrew diameter	2” (51 mm)
Inch thread range	½ to 28 tpi (60)
Metric thread range	1 to 56 mm (60)
Modular thread range	0.5 to 30 mm (52)
Diametral thread range	1 to 60 DP (60)
Longitudinal feed range	0.0017 to 0.095 IPR (0.04318 to 2.413 mpr)
Cross feed range	0.0009 to 0.050 IPR (0.2286 to 1.2192 mpr)
Rapids, longitudinal	80 IPM (2 MPM)
Rapids, cross	40 IPM (1 MPM)
Tailstock quill diameter	5.75” (145 mm)
Quill traverse (two speed)	7.87” (200 mm)
Tailstock center taper	No. 6 MT
Quill speed ratios	1:1 & 4:1
Typical Machine weight	29,040 lbs (13,172 kg)
Work piece capacity, between centers, unsupported	17,600 lbs (7,938 kgs)
Work piece capacity, between centers, with 1 steady rest	22,000 lbs (9,979 kgs)
Work piece capacity, between centers, with 2 steady rests	23,000 lbs (10,433 kgs)

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

SPECIFICATION	50 Series
Swing over bed	50.13” (1237mm)
Swing over Cross slide	37.38” (950mm)
Swing over gap	70.50” (1793 mm)
Gap length	23.75” (603.25 mm)
Center to center	60&rdquo to 800&rdquo (1524 mm to 20320 mm)
Type casting	One piece (monolithic) bed floor type
Bed way design	3 e/a with extra ways supporting apron
Bed width	28” / 32” (711 mm / 812 mm)
Spindle bore, standard	6.02” (153 mm)
Spindle nose, standard	A2-11
Optional	See options
Spindle speeds, number	18
Spindle speed range	18 To 1000 RPM (6” / 150 mm bore)
Main drive motor	30 HP (22.47 kW)
Optional	40 HP or 50 HP
Travel, cross slide	31.50” (800 mm)
Travel, top slide (power)	15.75” (400 mm)
Leadscrew diameter	2” (51 mm)
Inch thread range	0.50 to 28 tpi (60)
Metric thread range	1 to 56 mm (60)
Modular thread range	0.5 to 30 mm (52)
Diametral thread range	1 to 60 DP (60)
Longitudinal feed range	0.0017 to 0.095 IPR (0.04318 to 2.413 mpr)
Cross feed range	0.0009 to 0.050 IPR (0.2286 to 1.2192 mpr)
Rapids, longitudinal	80 IPM (2 MPM)
Rapids, cross	40 IPM (1 MPM)
Tailstock quill diameter	5.75” (145 mm)
Quill traverse (two speed)	7.87” (200 mm)
Tailstock center taper	No. 6 MT
Quill speed ratios	1:1 & 4:1
Typical Machine weight	29,920 lbs (13,571 kg)
Work piece capacity, between centers, unsupported	17,600 lbs (7,938 kgs)
Work piece capacity, between centers, with 1 steady rest	22,000 lbs (9,979 kgs)
Work piece capacity, between centers, with 2 steady rests	23,000 lbs (10,433 kgs)

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

SPECIFICATION	60 Series
Swing over bed	60.13” (1527mm)
Swing over Cross slide	47.25” (1201mm)
Swing over gap	80.25” (2040 mm)
Gap length	23.75” (603.25 mm)
Center to center	60&rdquo to 800&rdquo (1524 mm to 20320 mm)
Type casting	One piece (monolithic) bed floor type
Bed way design	3 e/a with extra ways supporting apron
Bed width	28” / 32” (711 mm / 812 mm)
Spindle bore, standard	6.02” (153 mm)
Spindle nose, standard	A2-11
Optional	See options
Spindle speeds, number	18
Spindle speed range	18 To 1000 RPM (6” / 150 mm bore)
Main drive motor	30 HP (22.47 kW)
Optional	40 HP or 50 HP
Travel, cross slide	31.50” (800 mm)
Travel, top slide (power)	15.75” (400 mm)
Leadscrew diameter	2” (51 mm)
Inch thread range	½ to 28 tpi (60)
Metric thread range	1 to 56 mm (60)
Modular thread range	0.5 to 30 mm (52)
Diametral thread range	1 to 60 DP (60)
Longitudinal feed range	0.0017 to 0.095 IPR (0.04318 to 2.413 mpr)
Cross feed range	0.0009 to 0.050 IPR (0.2286 to 1.2192 mpr)
Rapids, longitudinal	80 IPM (2 MPM)
Rapids, cross	40 IPM (1 MPM)
Tailstock quill diameter	5.75” (145 mm)
Quill traverse (two speed)	7.87” (200 mm)
Tailstock center taper	No. 6 MT
Quill speed ratios	1:1 & 4:1
Typical Machine weight	31,680 lbs (14,400 kg)
Work piece capacity, between centers, unsupported	17,600 lbs (7,938 kgs)
Work piece capacity, between centers, with 1 steady rest	22,000 lbs (9,979 kgs)
Work piece capacity, between centers, with 2 steady rests	23,000 lbs (10,433 kgs)

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

SPECIFICATION	70 Series
Swing over bed	70.50” (1790 mm)
Swing over Cross slide	57.38” (1460 mm)
Swing over gap	90.50" (2300 mm)
Gap length	23.75” (603.25 mm)
Center to center	60" to 800" (1524 mm to 20320 mm)
Type casting	One piece (monolithic) bed floor type
Bed way design	3 e/a with extra ways supporting apron
Bed width	28” / 32” (711 mm / 812 mm)
Spindle bore, standard	6.02” (153 mm)
Spindle nose, standard	A2-11
Optional	See options
Spindle speeds, number	18
Spindle speed range	18 To 1000 RPM (6” / 150 mm bore)
Main drive motor	30 HP (22.47 kW)
Optional	40 HP or 50 HP
Travel, cross slide	31.50” (800 mm)
Travel, top slide (power)	15.75” (400 mm)
Leadscrew diameter	2” (51 mm)
Inch thread range	½ to 28 tpi (60)
Metric thread range	1 to 56 mm (60)
Modular thread range	0.5 to 30 mm (52)
Diametral thread range	1 to 60 DP (60)
Longitudinal feed range	0.0017 to 0.095 IPR (0.04318 to 2.413 mpr)
Cross feed range	0.0009 to 0.050 IPR (0.2286 to 1.2192 mpr)
Rapids, longitudinal	80 IPM (2 MPM)
Rapids, cross	40 IPM (1 MPM)
Tailstock quill diameter	5.75” (145 mm)
Quill traverse (two speed)	7.87” (200 mm)
Tailstock center taper	No. 6 MT
Quill speed ratios	1:1 & 4:1
Typical Machine weight	33,440 lbs (15,200 kgs)
Work piece capacity, between centers, unsupported	17,600 lbs (7,938 kgs)
Work piece capacity, between centers, with 1 steady rest	22,000 lbs (9,979 kgs)
Work piece capacity, between centers, with 2 steady rests	23,000 lbs (10,433 kgs)

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

SPECIFICATIONS	AT-2140-G-TW	AT-2160-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	40” (1000mm)	60” (2000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500 mm)	118” (3000 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,830lbs (2650kg)	6,600lbs (3000kg)

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

SPECIFICATIONS	AT-2180-G-TW	AT-21120-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	7,480lbs (3400kg)	9,240lbs (4200kg)

Manual Lathe Heavy Duty American Turnmaster Power 5 Series

Complete Product Details & Parts

Get a Quote [+]

Key Features

Videos

Item Brochure

Lease Calculator

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

Manual Lathe Heavy Duty American Turnmaster Power 5 Series22"- 100" Heavy Duty Swing Lathes

All Rights Reserved © 2010 - 2011 www.lagun.com