Republic Lagun | American Turnmaster RL Series

Manual Lathe ML Series 13"- 24" Swing Lathes

One-piece casting for rigidity and vibration dampening.
Highest quality stress relieved Meehanite Castings
Tri-way Design, with three (3) Vee ways, maintains perfect alignment of carriage on bed and eliminates any twisting.
Hardened (Reishauer) ground gears
Induction hardened bed ways
Removable gap block for increased swing
Full length rear splash guard
Safety clutch on feed shaft
Turcite® B Anti-friction material on carriage ways
Cross slide nut with backlash eliminator
Inch-metric, totally enclosed universal gearbox provides Inch/metric threads without changing end train gears
Inch/metric dual dials on cross slide; compound & tailstock
Graduated tailstock barrel wit tang slot
Flood Coolant System
Chips and Coolant Tray in front for easy accessibility
Large spindle bore
Camlock spindle nose
Removable gap
Apron lead screw/feed rod reverse
Foot brake
Integrated automatic control for longitudinal/cross. Feeds and forward/reverse feeds in a snap

Manual Lathe RL-1440/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	ML-1740-G-TW	ML-1760-G-TW
Swing over bed	17” (435 mm)
Swing over cross slide	10-7/8” (277 mm)
Distance between centers	44” (1,120 mm)	57” (1,450 mm)
Spindle nose	D1-6
Spindle bore(max. bar diameter)	3 1/8” (80 mm)
Spindle speed	12 steps
Spindle speed range	36 – 1,800 RPM
Length on bed	17.3” (440 mm)
Width of bridge	18.75” (477 mm)
Cross slide travel	10.6” (270 mm)
Top slide travel	4.75” (120 mm)
Number of V ways	3 each “V” ways
Quill diameter	2.3” (59 mm)
Quill center	M.T. 4
Quill travel	5” (130 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)
Range of metric threads No.	0.2-14 (39)
Range of D.P. & No.( )	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)
Main motor	7.5 hp (5.60 kW)
Coolant pump	1/8 hp (0.09 kW)
Length packed	88” (2,240 mm)	108” (2,750 mm)
Width packed	>39” (1,000 mm)
Height packed	>63” (1,600 mm)
Gross Weight	4,510lbs (2,050 kg.)	5,280lbs (2,400 kg.)

Manual Lathe RL-1640/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	ML-2040-G-TW	ML-2060-G-TW
Swing over bed	20” (508 mm)
Swing over cross slide	13.90” (353 mm)
Distance between centers	40” (1,000 mm)	60” (1,500 mm)
Spindle nose	D1-6
Spindle bore(max. bar diameter)	3 1/8” (80 mm)
Spindle speed	12 steps
Spindle speed range	36 – 1,800 RPM
Length on bed	17.3” (440 mm)
Width of bridge	18.75” (477 mm)
Cross slide travel	10.6” (270 mm)
Top slide travel	4.75” (120 mm)
Number of V ways	3 each “V” ways
Quill diameter	2.3” (59 mm)
Quill center	M.T. 4
Quill travel	5” (130 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)
Range of metric threads No.	0.2-14 (39)
Range of D.P. & No.( )	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)
Main motor	7.5 hp (5.60 kW)
Coolant pump	1/8 hp (0.09 kW)
Length packed	94 ½” (2,400 mm)	114 ¼” (2,900 mm)
Width packed	>44 1/8” (1,120 mm)
Height packed	>68 ¾” (1,745 mm)
Gross Weight	4,510 lbs (2,050 kg.)	4,840 lbs (2,200 kg.)

Manual Lathe AT-1840/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1840-G-TW	AT-1860-G-TW
Swing over bed	18” (460 mm)	18” (460 mm)
Swing over cross slide	11” (280 mm)	11” (280 mm)
Distance between centers	40” (1000mm)	60” (1500mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210-280-380- 500-670-900-1200-1600	20-25-35-50-65-85-115-150-210-280-380- 500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	28” (710 mm)	28” (710 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	2 3/8” (76 mm)	2 3/8” (76 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	10 hp (7.46 kW)	10 hp (7.46 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500mm)	118” (3000mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,170lbs (2350kg)	5,940lbs (2700kg)

Manual Lathe AT-1880/120-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1880-G-TW	AT-18120-G-TW
Swing over bed	18” (460 mm)	18” (460 mm)
Swing over cross slide	11” (280 mm)	11” (280 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	28” (710 mm)	28” (710 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	2 3/8” (76 mm)	2 3/8” (76 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	10 hp (7.46 kW)	10 hp (7.46 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	6,820lbs (3100kg)	8,580lbs (3,900kg)

Manual Lathe AT-2140/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-2140-G-TW	AT-2160-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	40” (1000mm)	60” (2000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500 mm)	118” (3000 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,830lbs (2650kg)	6,600lbs (3000kg)

Manual Lathe AT-2180/120-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-2180-G-TW	AT-21120-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	7,480lbs (3400kg)	9,240lbs (4200kg)

Manual Lathe American Turnmaster RL Series

Complete Product Details & Parts

Get a Quote [+]

Key Features

Videos

Item Brochure

Lease Calculator

Manual Lathe ML Series 13"- 24" Swing Lathes

Manual Lathe RL-1440/60-G-TW13"- 24" Swing Lathes

Manual Lathe RL-1640/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-1840/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-1880/120-G-TW13"- 24" Swing Lathes

Manual Lathe AT-2140/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-2180/120-G-TW13"- 24" Swing Lathes

All Rights Reserved © 2010 - 2011 www.lagun.com