Republic Lagun | Manual Vertical Mills

FTV 4L E & SP EAlso Ideal for Small Shops

Table Size: 58" x 11" (1473 x 279mm)
Work Capacity: 1200 lbs. (550kg) - Maximum Work Load with Uniform Distribution
Power and Rapid Feeds: In All 3 Axes (Longitudinal, Cross, Knee)
Extra Table Longitudinal Handwheel: On the Front of the Saddle for Operator Convenience
Ways Double Support: Square Ways for Rigidity and Dove Tail Guides for Accuracy - Hardened and Ground Ways
Head Rotation: Left & Right (90°) - Rigid Mount & Worm Driven Rotation
Electrics: 220/440 Volts; 60Hz; 3 Phase - NEMA Type Enclosure with Disconnect Switch and Push Button Controls on the Head.

FTV 4L E & SP E Also Ideal for Small Shops

SPECIFICATION	FTV-4L-E	FTV-4L-SP-E
Table size	58” x 11” (1,473 x 279mm)	58” x 11” (1,473 x 279mm)
T-slots	3 on 2 1/2” (64mm) centers	3 on 2 1/2” (64mm) centers
T-slot size	5/8” (16mm)	5/8” (16mm)
Maximum weight on table	1,200 lbs. (544 kg)	1,200 lbs. (544 kg)
Table travel X-axis, manual/ with power feed	39” / 38” (991mm / 965mm)	39” / 38” (991mm / 965mm)
Cross travel, Y axis	15” / 14 1/2” (381mm / 368mm)	15” / 14 1/2” (381mm / 368mm)
Knee travel, Z axis	16 1/8” (410mm)16 1/8” (410mm)	16 1/8” (410mm)16 1/8” (410mm)
Ram travel	22 3/16” (559mm)22 3/16” (559mm)	22 3/16” (559mm)22 3/16” (559mm)
Geared Power Feeds, X & Y	0 ~ 52 IPM (0 ~ 1300mm/m)	0 ~ 52 IPM (0 ~ 1300mm/m)
Z	0 ~ 15 IPM (0 ~ 390mm/m)	0 ~ 15 IPM (0 ~ 390mm/m)
Rapid Traverse X & Y	102 IPM(2600mm/M)	102 IPM(2600mm/M)
Z	31 1/2 IPM (800mm/M)	31 1/2 IPM (800mm/M)
Feed and Rapid Drive	A, C, Brushless 5 HP (3.74 KW)	A, C, Brushless 5 HP (3.74 KW)
Main motor - Standard/option	4 HP / 7 1/2 HP (4.10 kW / 5.5 kW)	4 HP / 7 1/2 HP (4.10 kW / 5.5 kW)
Infinite variable speed	70 to 4200 RPM	70 to 4200 RPM
Head swivel	+/- 90°	+/- 90°
Head tilt	N/A	N/A
Distance, spindle to column	5 to 27” (127 to 685mm)	5 to 27” (127 to 685mm)
Distance, spindle to table	0 to 18” (0 to 457mm)	0 to 19 1/4” (0 to 488.95mm)
Power quill feeds to quill/rev.	.0015, .003, .006 inch/rev (.038;.076;.015mm/rev)	.0015, .003, .006 inch/rev (.038;.076;.015mm/rev)
Spindle taper	# 40 NST	# 40 NST
Quill diameter	4 3/8” (111mm)	4 3/8” (111mm)
Quill travel	6” (152mm)	6” (152mm)
Column turret Diameter (graduated)	16” (406mm)	16” (406mm)
Knee width	15 7/8” (403mm)	15 7/8” (403mm)
Knee to column bearing length	19” (483mm)	19” (483mm)
Saddle & table bearing length	29” (736mm)	29” (736mm)
Ram & turret bearing length	24” (610mm)	24” (610mm)
Ram total	40” (1,016mm)	40” (1,016mm)
Weight	4,000 lbs. (1,818 kg.)	4,000 lbs. (1,818 kg.)
Height	104” (2.64m)	104”(2.64m)
Width	67” (1.70m) 63” (1.60m)	67” (1.70m) 63” (1.60m)
Depth	63” (1.60m)	63” (1.60m)
Power, Dual Voltage Motors	230/440 Volts	230/440 Volts

FTV 4L E & SP E Personalized Your Machine

	"SLOTTER" Vertical Shaping Attachment The 3/4 HP vertical shaping head performs intricate shapes. Rear mounted, may be swung into place to perform light shaping operations. Adjusted to any vertical or compound angle to the table, can produce shapes which normally requires special broach. It is a must in cases of blind holes. It is mounted on the ram rear and can be rotated 180° to position it over the table for usage. 4” stroke from 80 - 420 spm. Order # 149-1140
	SLOTTER TOOL KIT With 7 shaping tools and 3 bit holders Order #149-1140A
	MULTI ANGLE ATTACHMENT (All Angle Head) Supplements the right angle attachment described on this page. Any corner with a small radius can be finished milled. The unit is supplied with 3 collets of 1/8” - 3/16” - 1/4”. Rotational speed is increased 50%. Available for R-8, #30, and #40 taper. Order # 132-1115
	RIGHT ANGLE HEAD Supplements the right angle attachment described on this page. Any corner with a small radius can be finished milled. The unit is supplied with 3 collets of 1/8” - 3/16” - 1/4”. Rotational speed is increased 50%. Available for R-8, #30, and #40 taper. Order # 132-1115
	ARBOR SUPPORT AND MILL ARBOR for use with right angle attachment for horizontal milling. Support features needle bearings. Order # 129-1113
	SWIVEL VISE 6 1/2" Flame hardened Vise with swivel base Order # 122-1107
	COLLET CHUCK WITH 12 COLLETS For 40 Taper Order # 103-1176
	PRECISION GROUND BALL SCREWS X-Y with support, Order # 166-1163 (Specify Machine Model)
	ERICKSON QUICK CHANGE LOCK NUT & WRENCH (For #40 Taper Spindle) Order # 101-1175
	BELLOWS DESIGNED WAY COVERS are made of neoprene coated material. Covers the ways top of knee and column Order # 162-1158
	POWER DRAW BARS Air operated Order Standard # 085-0110 Order Heavy Duty # 085-1110 Electric (Lagun HD) (Electro Pneumatic) (For 3L, 4L, 510) Order# 086-0090
	DIGITAL READOUT (DRO) 2, 3, and 4 axis systems from Acu-rite®, Anilam®, Newall®, and Sony®. Resolutions of 0.0005”, 0.0002”, or 0.0001” professionally installed. INCH/METRIC LCD QUILL SCALE Order # 270-1162
	UNIVERSAL DIVIDING HEAD w/40 to 1 ratio Universal model with gears to drive from left side of machine table.Supplied with tailstock, indexing plates for manual operation rapid index feature and tailstock. 8” Order # 175-1111(A) 10” Order # 175-1111(B) 12” Order # 522-3302 14” Order # 534-3303
	LAGUN H.D. GEARED POWER FEEDS (8 speed) X Order # 200-2020-X Y Order # 200-2020-Y Z Order # 200-2020-Z (1 Speed)
	ROTARY TABLES These tables can be mounted either horizontally or vertically, supplied with 3 dividing plates. A wide range of angular divisions can be made using an index plate having several circles of equal rotation of the workpiece to within 20 seconds of arc. Order # 179-1120 10" Diam. Order # 181-1125 12" Diam.
	RISER BLOCK Used to obtain clearance for very large workpieces . Riser block extends the height range 4"-8"-12" are easily mounted to the column of the machine with four bolts. Order # 146-1135 4" high. Order # 146-1136 8" high. Order # 148-1137 12" high.
	SPINDLE One piece spindle #30 or #40 Order# 101-1173 #30 Order# 101-1174 #40 Also available universal quick switch 200 and 300
	INFINITE VARIABLE POWER FEED UNIT Longitudinal #140 Order # 194-1152 Cross #140 Order # 190-1143 Vertical Knee #140 Order # 193-1150 #150 Also Available