Republic Lagun | Geminis GHT11

Republic Lagun Geminis GHT-11Heavy Duty Turning Center

Numerical Control

Capacity

Headstock

Carriages

Complete information is available in the item brochure.

SPECIFICATIONS	G2-2000
Maximum Turnign Diameter	58 or 80" (1,500 or 2,050 mm)
Swing Over Bed Ways	78" or 98" (2,000 or 2,500 mm)
Swing Over Cross Slide	58 or 80" (1,500 or 2,050 mm)
Distance Between Centers	39" to 944" (1,000 to 24,000 mm)
X-Axis Cross Slide	44" (1,130 mm)
Z-Axis Carriage & Tailstock	39" to 944" (1,000 to 24,000 mm)
Spindle Mount	DIN 55026-20 or 28
Spindle Drive Continuous & Intermittent	151/202Hp(113/151kW) to 201/269Hp(150/120kW)
Spindle Torque	39,828 to 58,968 lb-ft (54,000 to 79,950 Nm)
Spindle Speed	0 - 270 or 550 RPM
Maximum Through Hoke Diameter	14 to 20" (360 to 525 mm)
Turret Type	Square Head Turret
Tolling Positions	4 to 12" Positions
Tooling Type	1.5" (40 mm)
X-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Z-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Quill Diameter	15" (400 mm)
Quill Travel	13" (350 mm)
Unsupported Part Between Centers	77,161 to 165,346 lbs (35,000 to 75,000 mm)
Chuck & Part 12" From The Spindle Nose	17,636 to 26,455 lbs (8,000 to 12,000 kg)

SPECIFICATIONS	G2-2500
Maximum Turnign Diameter	58 or 80" (1,500 or 2,050 mm)
Swing Over Bed Ways	78" or 98" (2,000 or 2,500 mm)
Swing Over Cross Slide	58 or 80" (1,500 or 2,050 mm)
Distance Between Centers	39" to 944" (1,000 to 24,000 mm)
X-Axis Cross Slide	44" (1,130 mm)
Z-Axis Carriage & Tailstock	39" to 944" (1,000 to 24,000 mm)
Spindle Mount	DIN 55026-20 or 28
Spindle Drive Continuous & Intermittent	151/202Hp(113/151kW) to 201/269Hp(150/120kW)
Spindle Torque	39,828 to 58,968 lb-ft (54,000 to 79,950 Nm)
Spindle Speed	0 - 270 or 550 RPM
Maximum Through Hoke Diameter	14 to 20" (360 to 525 mm)
Turret Type	Square Head Turret
Tolling Positions	4 to 12" Positions
Tooling Type	1.5" (40 mm)
X-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Z-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Quill Diameter	15" (400 mm)
Quill Travel	13" (350 mm)
Unsupported Part Between Centers	77,161 to 165,346 lbs (35,000 to 75,000 mm)
Chuck & Part 12" From The Spindle Nose	17,636 to 26,455 lbs (8,000 to 12,000 kg)

SPECIFICATIONS	G4-2000
Maximum Turnign Diameter	61 or 80" (1,550 or 2,050 mm)
Swing Over Bed Ways	78" or 98" (2,000 or 2,500 mm)
Swing Over Cross Slide	61 or 80" (1,550 or 2,050 mm)
Distance Between Centers	39" to 944" (1,000 to 24,000 mm)
X-Axis Cross Slide	44" (1,130 mm)
Z-Axis Carriage & Tailstock	39" to 944" (1,000 to 24,000 mm)
Spindle Mount	DIN 55026-20 or 28
Spindle Drive Continuous & Intermittent	151/202Hp(113/151kW) to 201/269Hp(150/120kW)
Spindle Torque	39,828 to 58,968 lb-ft (54,000 to 79,950 Nm)
Spindle Speed	0 - 270 or 550 RPM
Maximum Through Hoke Diameter	14 to 20" (360 to 525 mm)
Turret Type	Square Head Turret
Tolling Positions	4 to 12" Positions
Tooling Type	1.5" (40 mm)
X-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Z-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Quill Diameter	15" (400 mm)
Quill Travel	13" (350 mm)
Unsupported Part Between Centers	77,161 to 165,346 lbs (35,000 to 75,000 mm)
Chuck & Part 12" From The Spindle Nose	17,636 to 26,455 lbs (8,000 to 12,000 kg)

SPECIFICATIONS	G4-2500
Maximum Turnign Diameter	58 or 80" (1,500 or 2,050 mm)
Swing Over Bed Ways	78" or 98" (2,000 or 2,500 mm)
Swing Over Cross Slide	58 or 80" (1,500 or 2,050 mm)
Distance Between Centers	39" to 944" (1,000 to 24,000 mm)
X-Axis Cross Slide	44" (1,130 mm)
Z-Axis Carriage & Tailstock	39" to 944" (1,000 to 24,000 mm)
Spindle Mount	DIN 55026-20 or 28
Spindle Drive Continuous & Intermittent	151/202Hp(113/151kW) to 201/269Hp(150/120kW)
Spindle Torque	39,828 to 58,968 lb-ft (54,000 to 79,950 Nm)
Spindle Speed	0 - 270 or 550 RPM
Maximum Through Hoke Diameter	14 to 20" (360 to 525 mm)
Turret Type	Square Head Turret
Tolling Positions	4 to 12" Positions
Tooling Type	1.5" (40 mm)
X-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Z-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Quill Diameter	15" (400 mm)
Quill Travel	13" (350 mm)
Unsupported Part Between Centers	77,161 to 165,346 lbs (35,000 to 75,000 mm)
Chuck & Part 12" From The Spindle Nose	17,636 to 26,455 lbs (8,000 to 12,000 kg)

SPECIFICATIONS	G4-3200
Maximum Turnign Diameter	160" (2,700 mm)
Swing Over Bed Ways	125" (3,200 mm)
Swing Over Cross Slide	106" (2,700 mm)
Distance Between Centers	39" to 944" (1,000 to 24,000 mm)
X-Axis Cross Slide	60" (1,530 mm)
Z-Axis Carriage & Tailstock	39" to 944" (1,000 to 24,000 mm)
Spindle Mount	DIN 55026-20 or 28
Spindle Drive Continuous & Intermittent	151/202Hp(113/151kW) to 201/269Hp(150/120kW)
Spindle Torque	39,828 to 58,968 lb-ft (54,000 to 79,950 Nm)
Spindle Speed	0 - 270 or 550 RPM
Maximum Through Hoke Diameter	14 to 20" (360 to 525 mm)
Turret Type	Square Head Turret
Tolling Positions	4 to 12" Positions
Tooling Type	1.5" (40 mm)
X-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Z-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Quill Diameter	23" (600 mm)
Quill Travel	11" (300 mm)
Unsupported Part Between Centers	77,161 to 165,346 lbs (35,000 to 75,000 mm)
Chuck & Part 12" From The Spindle Nose	17,636 to 26,455 lbs (8,000 to 12,000 kg)

SPECIFICATIONS	G2-2000
Maximum Turnign Diameter	58 or 80" (1,500 or 2,050 mm)
Swing Over Bed Ways	78" or 98" (2,000 or 2,500 mm)
Swing Over Cross Slide	58 or 80" (1,500 or 2,050 mm)
Distance Between Centers	39" to 944" (1,000 to 24,000 mm)
X-Axis Cross Slide	44" (1,130 mm)
Z-Axis Carriage & Tailstock	39" to 944" (1,000 to 24,000 mm)
Spindle Mount	DIN 55026-20 or 28
Spindle Drive Continuous & Intermittent	151/202Hp(113/151kW) to 201/269Hp(150/120kW)
Spindle Torque	39,828 to 58,968 lb-ft (54,000 to 79,950 Nm)
Spindle Speed	0 - 270 or 550 RPM
Maximum Through Hoke Diameter	14 to 20" (360 to 525 mm)
Turret Type	Square Head Turret
Tolling Positions	4 to 12" Positions
Tooling Type	1.5" (40 mm)
X-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Z-Axis Feed & Rapid Rates	236in/min (6,000mm/min)
Quill Diameter	15" (400 mm)
Quill Travel	13" (350 mm)
Unsupported Part Between Centers	77,161 to 165,346 lbs (35,000 to 75,000 mm)
Chuck & Part 12" From The Spindle Nose	17,636 to 26,455 lbs (8,000 to 12,000 kg)