Republic Lagun | Geminis GHT9

Republic Lagun Geminis GHT-9Heavy Duty Flat Bed

Numerical Control

Siemens 810 D - 840 D
Fanuc 32i - 31i
Fagor 8055 – 8070
Heidenhain Manual Plus 620
Flat colour screen LCD 10.4” - 11”
Complete alphanumeric keyboard
DIN/ISO programming extended with high level language
Sofware for conversational programming
PLC included
Graphic simulation
Output for communication system RS-232, USB

Capacity

Swing over bed : 1600 mm
Swing over cross slide : 1320 mm (G4) – 1225 mm (G2)
Distance between centres : 1-24 m
Bed width (G4) : 1300 mm
Bed width (G2) : 1000 mm
Weight between centres : 17000 kg
Machine weight G4 (1 m): 19000 kg
Weight for each extra meter : 2500 kg
Machine weight G2 (1 m): 16000 kg
Weight for each extra meter : 2000 kg

Headstock

Main spindle bore : 155 mm
Main spindle nose : DIN 55026-15
Spindle diameter at front bearing : 260 mm
Four speed ranges : 0-710 min-1

Carriages

Width of longitudinal slide : 1300 mm
Width of cross slide : 510 mm
Cross slide travel : 830 mm

Complete information is available in the item brochure.

Republic Lagun Geminis GHT-9Heavy Duty Flat Bed

SPECIFICATION	GHT 9 G2	GHT 9 G4
Turning Diameter Over Z-Axis Bed Ways	62.99” (1,600 mm)	62.99” (1,600 mm)
Turning Diameter Over X-Axis Cross Slid	48.22” (1,225 mm)	51.96” (1,320 mm)
X-Axis Cross Slide	32.67” (830 mm)	32.67” (830 mm)
X-Axis Travel Below Center	0.78” (20 mm)	0.78” (20 mm)
Z-Axis Minimum Distance Between Centers	39.37” (1,000 mm)	39.37” (1,000 mm)
Z-Axis Maximum Distance Between	944.88” (24,000 mm)	944.88” (24,000 mm)
Spindle Mount	DIN 55026-11	DIN 55026-11
Spindle Through Hole	5.90” (150 mm)	5.90” (150 mm)
Spindle Diameter At The Front Bearing	10.23” (260 mm)	10.23” (260 mm)
Spindle Wall Thickness At The Front	2.16” (55 mm)	2.16” (55 mm)
Spindle Drive Continuous And Intermittent	109 / 147 Hp (82 / 109 kW)	109 / 147 Hp (82 / 109 kW)
Spindle Torque	7,928 lbs-ft (10,750 Nm)	7,928 lbs-ft (10,750 Nm)
Spindle Speed Range	0 to 710 RPM	0 to 710 RPM
C-Axis Positioning	± 360° Rotation At 10 RPM	± 360° Rotation At 10 RPM
Z-Axis Intermittent Torque	36.88 lbs-ft (50 Nm)	36.88 lbs-ft (50 Nm)
X And Intermittent Torque	14.01 lbs-ft (19 Nm)	14.01 lbs-ft (19 Nm)
Z-Axis Carriage Feed And Rapid Rates	314 in/min (8,000 mm/min)	314 in/min (8,000 mm/min)
X-Axis Cross Slide Feed And Rapid Rates	236 in/min (6,000 mm/min)	236 in/min (6,000 mm/min)
Auxiliary Unit’s Positioning Rates	39 in/min (1,000 mm/min)	39 in/min (1,000 mm/min)
Quill Diameter – Metric 80 Center	9.44” (240 mm)	9.44” (240 mm)
Quill Travel	10.62” (270 mm)	10.62” (270 mm)
Unsupported Workpiece Between Centers	38,580 lbs (17,500 kg)	38,580 lbs (17,500 kg)
Chucked At A Distance Of 9.84” (250 mm)	38,580 lbs (17,500 kg)	38,580 lbs (17,500 kg)
Machine Weight Per 39.37” (1,000 mm)	27,778 lbs (15,000 kg)	27,778 lbs (15,000 kg)
Weight For 39.37” (1,000 mm) Of Length	4,409 lbs (2,000 kg)	4,409 lbs (2,000 kg)

Manual Lathe AT-1550-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1550-G-TW
Center height	7 ½” (190 mm)
Swing over bed	15 ¼” (387 mm)
Swing over cross slide	9 3/8” (238 mm)
Distance between centers	50” (1,250 mm)
Spindle nose	D1-6
Spindle bore (max. bar dia)	2 3/16” (56 mm)
Spindle speed	16 steps
Spindle speed range	25-2,000 rpm
Ranges	25-33-45-60-80-108-140-190-265- 350-470-625-840-1120-1500-2000
Length on bed	19” (484 mm)
Width of bridge	17 ½” (250 mm)
Cross slide travel	9 ¼” (235 mm)
Top slide travel	4 ¾” (120 mm)
Number of V ways	3 each “V” ways
Bed width	11” (280 mm)
Swing in gap	24” (610 mm)
Gap bed length faceplate	7 5/8” (195 mm)
Quill diameter	2.8” (71.86 mm)
Quill center	M.T.4
Quill travel	6 1/8” (156 mm)
Range of whitworth threads & No. ( )	2-72 T.P.I (45)
Range of metric threads & No.( )	0.2-14 (39)
Range of D.P. & No. ( )	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)
Main motor	7.5 hp (5.60 kW)
Coolant pump	1/8 hp (0.09 kW)
Length packed	102” (2,580 mm)
Width packed	43” (1,100 mm)
Height packed	60” (1,540 mm)
Gross Weight	3,740 lbs. (1,700 kg)

Manual Lathe AT-1840/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1840-G-TW	AT-1860-G-TW
Swing over bed	18” (460 mm)	18” (460 mm)
Swing over cross slide	11” (280 mm)	11” (280 mm)
Distance between centers	40” (1000mm)	60” (1500mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210-280-380- 500-670-900-1200-1600	20-25-35-50-65-85-115-150-210-280-380- 500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	28” (710 mm)	28” (710 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	2 3/8” (76 mm)	2 3/8” (76 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	10 hp (7.46 kW)	10 hp (7.46 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500mm)	118” (3000mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,170lbs (2350kg)	5,940lbs (2700kg)

Manual Lathe AT-1880/120-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1880-G-TW	AT-18120-G-TW
Swing over bed	18” (460 mm)	18” (460 mm)
Swing over cross slide	11” (280 mm)	11” (280 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	28” (710 mm)	28” (710 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	2 3/8” (76 mm)	2 3/8” (76 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	10 hp (7.46 kW)	10 hp (7.46 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	6,820lbs (3100kg)	8,580lbs (3,900kg)

Manual Lathe AT-2140/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-2140-G-TW	AT-2160-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	40” (1000mm)	60” (2000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500 mm)	118” (3000 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,830lbs (2650kg)	6,600lbs (3000kg)

Manual Lathe AT-2180/120-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-2180-G-TW	AT-21120-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	7,480lbs (3400kg)	9,240lbs (4200kg)

Republic Lagun Geminis GHT-9

Complete Product Details & Parts

Get a Quote [+]

Key Features

Videos

Item Brochure

Lease Calculator

Republic Lagun Geminis GHT-9Heavy Duty Flat Bed

Republic Lagun Geminis GHT-9Heavy Duty Flat Bed

Manual Lathe AT-1550-G-TW13"- 24" Swing Lathes

Manual Lathe AT-1840/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-1880/120-G-TW13"- 24" Swing Lathes

Manual Lathe AT-2140/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-2180/120-G-TW13"- 24" Swing Lathes

All Rights Reserved © 2010 - 2011 www.lagun.com