Republic Lagun | Zayer Machining Center

Zayer GPCU & GMCUFixed & Elevating Rail Gantry Machining Center

Features Include

Fixed & Elevating Rail Bridge
Siemens 840D Or Fanuc’s 31i Control
Dual Function Guideway System w/ Fluidic Axis Support
Hardened & Ground Box Guideways
Cylindrical Roller Packs For The (X, Y, Z & W-Axes)
Rack & Dual Motor Driven Pinions (X & Y-Axes)
Ball Screws With Double Preloaded Nuts (Z & W-Axes)
Optical Linear Scales On The (X, Y, Z & W-Axes)
Chip Conveyer & Coolant System
Refrigeration For The Gear Box, Ram & Head
Vertical Spindle Attachment Head
Spindle Head Changing Capability
5 Axis Head Optional

Complete information is available in the item brochure.

Zayer GPCU & GMCUFixed & Elevating Rail Gantry Machining Center

SPECIFICATION	GMCU & GPCU
Table Length	196 to 1,220" (5,000 to 31,000 mm)
Table Width	78 to 137" (2,000 to 3,500 mm)
Floor Plate Load Capacity	3,073 lbs/ft2 (15,000 kg/m2)
X-Axis Longitudinal	157 to 1,181" (4,000 to 30,000 mm)
Y-Axis Cross	159 to 218" (4,050 to 5,550 mm)
Z-Axis Vertical	49 to 98" (1,250 to 2,500 mm)
W-Axis - Elevating Rail	47 to 118" (1,200 to 3,000 mm)
Between The Columns	129 to 188" (3,300 to 4,800 mm)
Table To Spindle - Fixed Rail	59 or 71" (1,515 or 1,815 mm)
Table To Spindle - Elevating Rail	79 to 150" (2,015 to 3,815 mm)
Main Motor - Continuous	80 to 100 Hp (60 to 75 kW)
Spindle Speed	35 to 4,500 RPM
Spindle Taper	ISO 50 or Big Plus CAT 50
X, Y & Z-Axes Working Feeds	.24 to 393 in/min (6 to 10,000 mm/min)
X-Axis Rapid Feeds	787 in/min (20,000 mm/min)
Y & Z-Axes Rapid Feeds	984 in/min (25,000 mm/min)
W-Axis Positioning Rate	39 in/min (1,000 mm/min)
Tool Changer # of Tools	30 to 200
Tool Change Time	20 seconds
Maximum Tool Weight	55 or 77 lbs (25 or 35 kg)
Maximum Tool Diameter	4 to 9” (125 to 240 mm)
Maximum Tool Length	11 to 23” (300 to 600 mm)

Manual Lathe AT-1550-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1550-G-TW
Center height	7 ½” (190 mm)
Swing over bed	15 ¼” (387 mm)
Swing over cross slide	9 3/8” (238 mm)
Distance between centers	50” (1,250 mm)
Spindle nose	D1-6
Spindle bore (max. bar dia)	2 3/16” (56 mm)
Spindle speed	16 steps
Spindle speed range	25-2,000 rpm
Ranges	25-33-45-60-80-108-140-190-265- 350-470-625-840-1120-1500-2000
Length on bed	19” (484 mm)
Width of bridge	17 ½” (250 mm)
Cross slide travel	9 ¼” (235 mm)
Top slide travel	4 ¾” (120 mm)
Number of V ways	3 each “V” ways
Bed width	11” (280 mm)
Swing in gap	24” (610 mm)
Gap bed length faceplate	7 5/8” (195 mm)
Quill diameter	2.8” (71.86 mm)
Quill center	M.T.4
Quill travel	6 1/8” (156 mm)
Range of whitworth threads & No. ( )	2-72 T.P.I (45)
Range of metric threads & No.( )	0.2-14 (39)
Range of D.P. & No. ( )	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)
Main motor	7.5 hp (5.60 kW)
Coolant pump	1/8 hp (0.09 kW)
Length packed	102” (2,580 mm)
Width packed	43” (1,100 mm)
Height packed	60” (1,540 mm)
Gross Weight	3,740 lbs. (1,700 kg)

Manual Lathe AT-1840/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1840-G-TW	AT-1860-G-TW
Swing over bed	18” (460 mm)	18” (460 mm)
Swing over cross slide	11” (280 mm)	11” (280 mm)
Distance between centers	40” (1000mm)	60” (1500mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210-280-380- 500-670-900-1200-1600	20-25-35-50-65-85-115-150-210-280-380- 500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	28” (710 mm)	28” (710 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	2 3/8” (76 mm)	2 3/8” (76 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	10 hp (7.46 kW)	10 hp (7.46 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500mm)	118” (3000mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,170lbs (2350kg)	5,940lbs (2700kg)

Manual Lathe AT-1880/120-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-1880-G-TW	AT-18120-G-TW
Swing over bed	18” (460 mm)	18” (460 mm)
Swing over cross slide	11” (280 mm)	11” (280 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	28” (710 mm)	28” (710 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	2 3/8” (76 mm)	2 3/8” (76 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	10 hp (7.46 kW)	10 hp (7.46 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	6,820lbs (3100kg)	8,580lbs (3,900kg)

Manual Lathe AT-2140/60-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-2140-G-TW	AT-2160-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	40” (1000mm)	60” (2000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	100” (2500 mm)	118” (3000 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	5,830lbs (2650kg)	6,600lbs (3000kg)

Manual Lathe AT-2180/120-G-TW13"- 24" Swing Lathes

SPECIFICATIONS	AT-2180-G-TW	AT-21120-G-TW
Swing over bed	21” (533 mm)	21” (533 mm)
Swing over cross slide	14” (356 mm)	14” (356 mm)
Distance between centers	80” (2000mm)	120” (3000mm)
Spindle nose	D1-8	D1-8
Spindle bore(max. bar diameter)	3 1/16” (78.5 mm)	3 1/16” (78.5 mm)
Spindle speed	16 steps	16 steps
Spindle speed range	20 – 1,600 rpm	20 – 1,600 rpm
Ranges:	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600	20-25-35-50-65-85-115-150-210- 280-380-500-670-900-1200-1600
Length on bed	21” (537 mm)	21” (537 mm)
Width of bridge	21 3/8” (542 mm)	21 3/8” (542 mm)
Cross slide travel	11” (280 mm)	11” (280 mm)
Top slide travel	5 3/8” (137 mm)	5 3/8” (137 mm)
Number of V ways	3 each “V” ways	3 each “V” ways
Bed width	13 ½” (345 mm)	13 ½” (345 mm)
Swing in gap	31” (790 mm)	31” (790 mm)
Gap bed length from faceplate	8” (200 mm)	8” (200 mm)
Quill diameter	4” (102 mm)	4” (102 mm)
Quill center	M.T. 5	M.T. 5
Quill travel	7” (178 mm)	7” (178 mm)
Range of whit worth threads& No. ( )	2-72 T.P.I (45)	2-72 T.P.I (45)
Range of metric threads No.	0.2/14 (39)	0.2/14 (39)
Range of D.P. & No.( )	8-44 (21)	8-44 (21)
Range of M.P. & No. ( )	0.3-3.5 (18)	0.3-3.5 (18)
Longitudinal feed	0.0015-0.04” (0.04-1.0 mm)	0.0015-0.04” (0.04-1.0 mm)
Cross feeds	0.00075-0.02” (0.02-0.5 mm)	0.00075-0.02” (0.02-0.5 mm)
Main motor	12 ½ hp (9 kW)	12 ½ hp (9 kW)
Coolant pump	1/8 hp (0.09 kW)	1/8 hp (0.09 kW)
Length packed	138” (3510 mm)	178” (4520 mm)
Width packed	>44” (1,120 mm)	>44” (1,120 mm)
Height packed	>66” (1,670 mm)	>66” (1,670 mm)
Gross Weight	7,480lbs (3400kg)	9,240lbs (4200kg)

Republic Lagun | Zayer Machining Center - GPCU & GMCU

Complete Product Details & Parts

Get a Quote [+]

Key Features

Videos

Item Brochure

Lease Calculator

Zayer GPCU & GMCUFixed & Elevating Rail Gantry Machining Center

Zayer GPCU & GMCUFixed & Elevating Rail Gantry Machining Center

Manual Lathe AT-1550-G-TW13"- 24" Swing Lathes

Manual Lathe AT-1840/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-1880/120-G-TW13"- 24" Swing Lathes

Manual Lathe AT-2140/60-G-TW13"- 24" Swing Lathes

Manual Lathe AT-2180/120-G-TW13"- 24" Swing Lathes

All Rights Reserved © 2010 - 2011 www.lagun.com