Skip to content

Republic Lagun Machine Tool Megamill MVM-4E Vertical Knee Mill

OUTSTANDING FEATURES

  • Spindle taper #40 NST
  • 5 HP Motor
  • X and Y axis Hi-precision ballscrews
  • Flood coolant system
  • Hardened & Precision ground ways
  • Auto lubrication system
  • Operators Manual/Parts List
  • Power Knee; Built in Variable Speeds and feeds for X and Y
  • Draw bar.
  • Basic Service Tool kit
  • 220V NEMA type column mounted electric box with emergency stop and disconnect switch.
  • Step down transformer 110V to push buttons
  • Rubber chip cover in front & rear
  • Chip tray & coolant collector (Base mounted)
Hide

DESCRIPTION

Republic Lagun Machine Tool Co. presents the Megamill MVM-4E Vertical Knee Mill. Equipped with a # 40 NST spindle taper and a spindle run out of 0.0002” (0.005mm), the heavy duty MVM-4E guarantees highly accurate results. Additionally, the spindle is constructed of fully hardened and ground, ultra-stable SCM415 (SAE4115) Cr-Mo steel alloy with tempering treatment. For your convenience this model comes equipped with a one shot lubrication system. This system provides oil to all sliding surfaces, nuts, and lead screws, eliminating the need to manually lubricate each part individually. The combination of these traits makes this vertical knee mill machine a user friendly, reliable, and durable machine.

The MVM-4E Vertical Knee Mill now comes standard with an optional Electronic Variable Speed (EVS) head, which provides full HP at all RPMs. This helps decrease energy consumption by delivering speed levels as needed, as opposed to consistently. By assuring it runs precisely at the users desired speed, the EVS head also avoids disturbing material during milling.

*Note: Interested in more vertical knee mill machines? Please take a look at our MVM-1 and MVM-2 models. Or browse all manual mills offered at Lagun Engineering here.

Check us out on Instagram for more posts and videos!

SPECIFICATIONS

Mill Model:FTV-2FMVM-1MVM-2MVM-4Millimatic IIMillimatic IIIMega 4 SurfaceMega 4 Volume
Table Size55.25" x 10"49" x 9"50" x 10"58" x 12"55.25" x 10"55.25" x 10"58" x 11"58" x 11"
Weight Cap:750 lb400 lb661 lb1,200 lb750 lb750 lb1,200 lb1,200 lb
X Travel38" (34.5" w/PF)30"35" (32" w/PF)39.37"36"36"37.38"41"
Y Travel15.98"12"16"15.35"15.25"15.25"14.6"14.5"
Z Travel15.98"16"16"15.75"16"16"15.75"15.75"
Ram Travel22.44"15.35"22.04"20"22.2"22.2"20"20"
Motor HP5 HP3 HP3 HP5 HP5 HP5 HP5 HP5 HP
RPM Range55-4,25060-4,20060-4,50060-4,30055-4,25055-4,25060-4,30060-4,300
Drilling Cap1.25"
Milling Cap4 Cu in/min
Boring RangeUp to 8"
Spindle TaperR-8R-8R-8#40 NSTR-8R-8#40 NST#40 NST
Quill Diameter3.38"3.38"3.38"4.13"3.38"3.38"4.13"4.13"
Quill Travel5"5"5"5"5"5"5"4.25"
CNC?Non CNCNon CNCNon CNCNon CNCCNCCNCCNCCNC
CNC AxisN/AN/AN/AN/A2323
Mill Model:FTV-2FMVM-1MVM-2MVM-4Millimatic IIMillimatic IIIMega 4 SurfaceMega 4 Volume
Table Size55.25″ x 10″49″ x 9″50″ x 10″58″ x 12″55.25″ x 10″55.25″ x 10″58″ x 11″58″ x 11″
Weight Cap:750 lb400 lb661 lb1,200 lb750 lb750 lb1,200 lb1,200 lb
X Travel38″ (34.5″ w/PF)30″35″ (32″ w/PF)39.37″36″36″37.38″41″
Y Travel15.98″12″16″15.35″15.25″15.25″14.6″14.5″
Z Travel15.98″16″16″15.75″16″16″15.75″15.75″
Ram Travel22.44″15.35″22.04″20″22.2″22.2″20″20″
Motor HP5 HP3 HP3 HP5 HP5 HP5 HP5 HP5 HP
RPM Range55-4,25060-4,20060-4,50060-4,30055-4,25055-4,25060-4,30060-4,300
Drilling Cap1.25″
Milling Cap4 Cu in/min
Boring RangeUp to 8″
Spindle TaperR-8R-8R-8#40 NSTR-8R-8#40 NST#40 NST
Quill Diameter3.38″3.38″3.38″4.13″3.38″3.38″4.13″4.13″
Quill Travel5″5″5″5″5″5″5″4.25″
CNC?Non CNCNon CNCNon CNCNon CNCCNCCNCCNCCNC
CNC AxisN/AN/AN/AN/A2323
Mill Model:FTV-2FMVM-1MVM-2MVM-4Millimatic IIMillimatic IIIMega 4 SurfaceMega 4 Volume
Table Size55.25″ x 10″49″ x 9″50″ x 10″58″ x 12″55.25″ x 10″55.25″ x 10″58″ x 11″58″ x 11″
Weight Cap:750 lb400 lb661 lb1,200 lb750 lb750 lb1,200 lb1,200 lb
X Travel38″ (34.5″ w/PF)30″35″ (32″ w/PF)39.37″36″36″37.38″41″
Y Travel15.98″12″16″15.35″15.25″15.25″14.6″14.5″
Z Travel15.98″16″16″15.75″16″16″15.75″15.75″
Ram Travel22.44″15.35″22.04″20″22.2″22.2″20″20″
Motor HP5 HP3 HP3 HP5 HP5 HP5 HP5 HP5 HP
RPM Range55-4,25060-4,20060-4,50060-4,30055-4,25055-4,25060-4,30060-4,300
Drilling Cap1.25″
Milling Cap4 Cu in/min
Boring RangeUp to 8″
Spindle TaperR-8R-8R-8#40 NSTR-8R-8#40 NST#40 NST
Quill Diameter3.38″3.38″3.38″4.13″3.38″3.38″4.13″4.13″
Quill Travel5″5″5″5″5″5″5″4.25″
CNC?Non CNCNon CNCNon CNCNon CNCCNCCNCCNCCNC
CNC AxisN/AN/AN/AN/A2323
Hide

* All Product Specs are Subject to Change at Any Time

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:

PARTS@LAGUN.COM

or call

800.421.2105

 

*Applies to domestic sales only.