pixel

This product is used widely in these industries:

MODELATC 618-GL-CNC

AMERICAN TURNMASTER’S ultra high precision CNC tool room lathe comes with a user friendly CNC control system and a manual hand wheel control.

  • The saddle slide ways feature Turcite B anti-friction material
  • Cross slide ways have hardened and ground tool steel inserts for smooth, accurate movement
  • 3 HP EVS drive system
  • Full-bearing tailstock with No. 2 M.T. and inch/metric graduation
  • Square turret accepts standard 3/8” square tool bits. Single handle unlocks-indexes-locks turret to the next tool position
  • 2 Axis Contouring Control System
  • Solid one-piece enclosed headstock with high precision pre-loaded ball bearing spindle
  • It is compact in size so easily can fit  in medical labs, educational workshops and other small spaced areas.

Turning is Lagun’s business.

Category:
Lathes

Description

AMERICAN TURNMASTER’S ultra high precision CNC tool room lathe comes with a user friendly CNC control system and a manual hand wheel control.

  • The saddle slide ways feature Turcite B anti-friction material
  • Cross slide ways have hardened and ground tool steel inserts for smooth, accurate movement
  • 3 HP EVS drive system
  • Full-bearing tailstock with No. 2 M.T. and inch/metric graduation
  • Square turret accepts standard 3/8” square tool bits. Single handle unlocks-indexes-locks turret to the next tool position
  • 2 Axis Contouring Control System
  • Solid one-piece enclosed headstock with high precision pre-loaded ball bearing spindle
  • It is compact in size so easily can fit  in medical labs, educational workshops and other small spaced areas.

Turning is Lagun’s business.


Features

 

American Turnmaster Ultra High Precision CNC Lathe ATC-618-GL-CNC

  • 3HP (2.24 kW) YASKAWA inverter 3HP (2.24 kW) frequency motor (50-4000RPM)
  • 220V / 60 Hz / 3 Phase electrics
  • X, Z axis servo motor, 750W
  • X, Z axis precision ball screw
  • Tailstock (MT No.2)
  • Simple air collet closer
  • Mobile X, Z MPG
  • Gang tool block
  • Work light
  • Coolant pump

Includes standard equipment as described above.

 

Specs

  • ATC-618-GL-CNC

  • Capacity

  • Swing over bed ways

    11” (280 mm)

  • Max. turning diameter

    6” (152 mm)

  • Max. turning length

    18” (457 mm)

  • Bar stock diameter (5C collet)

    1-1/16” (27 mm)

  • Spindle

  • Hole through spindle

    1-1/4” (31.75 mm)

  • Spindle speeds, variable

    50 – 4,000 RPM

  • Spindle Nose

    4 degree taper

  • Max. chuck diameter

    6” (152 mm)

  • Travel

  • Max. X-axis travel

    6” (155 mm)

  • Max. Z-axis travel

    13½” (340 mm)

  • Rapid traverse rate

    787 IPM (20 M/min)

  • Tailstock Quill Travel

    3-3/4” (95 mm)

  • Quill Taper

    No. 2 MT

  • Motor

  • Spindle EVS Drive Motor

    3 HP (2.24 kW)

Warranty

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at

[email protected]

or call

800.421.2105

 

*Applies to domestic sales only.

Accessories

Special electrics

CSA/Underwriters laboratories (UL)

Steady Rest

with rollers

Follow Rest

with rollers

Chucks

3, 4 or 6 jaws

Similar Models