This product is used widely in these industries:
Aerospace
Defense
Transportation
Construction
Job Shops
Oil and Gas
Renewable Energy
The American Turnmaster “Power Five” series provides superior craftsmanship and outstanding performance. Power Five heavy duty lathes have a three bedway design, with extra way on front of face of base supporting the apron and one piece bed floor type casting.
*Note: If you are interested in power lathes, please take a look at our other lathes.
Check us out on Instagram for more posts and videos!
SCROLL TO VIEW MORE
The American Turnmaster “Power Five” series provides superior craftsmanship and outstanding performance. Power Five heavy duty lathes have a three bedway design, with extra way on front of face of base supporting the apron and one piece bed floor type casting.
*Note: If you are interested in power lathes, please take a look at our other lathes.
Check us out on Instagram for more posts and videos!
Outstanding Features
• One piece (monolithic) bed, floor type casting
• Three bedway design, with extra way on front face of base supporting the apron.
• All three ways are hardened and ground
• Alloy steel spindle with opposed taper roller bearings
• Dual chucks are optionally available
• Hardened and ground gears and shafts and cross slide ways
• Electromagnetic spindle brake
• Universal inch / metric gear box, totally enclosed
• 18 speed geared headstock
• Six way rapid traverse and power feed to top slide
• Thread chasing dial
• Overload safety device on apron
• Dual voltage spindle motor and controls,
30 HP (22 kW)
• Carriage position device
• Pressurized one shot lube system for cross slide and carriage
Capacity
Swing over bed
45" - 70" (1,135 - 1,790 mm)
Center distance
60" min to 800" max (1524 mm to 20320 mm)
Headstock
Spindle bore, standard
6" (153 mm) larger bores available upon request
Spindle nose, standard
A2-11
Spindle speeds
18 steps Optional 4 steps, infinitely variable with constant service speed.
Spindle speed range
7 to 700 RPM (6" / 150 mm bore)
Main drive motor
30 HP (22 kW)
Tailstock
Tailstock quill diameter
5.75" (145 mm) Optional 9.25" (235 mm) available upon request
Quill traverse (two speed)
7.87" (200 mm)
One year or 2,000 hours,(single shifting) whichever occurs first. For parts and service contact our support team at:
PARTS@LAGUN.COM
or call
800.421.2105
*Applies to domestic sales only.