This product is used widely in these industries:

MODELMegamill MVM-2

Machine photo of Lagun Vertical Megamill MVM-2

Description

Lagun Megamill MVM-2 has features such as a one-shot central lubrication system, infinite speeds up to 4500 RPM, and Electronic Variable Speed (EVS) as an option. The Megamill also utilizes a special high strength, gray cast iron produced by the Meehanite process. As a result of the Meehanite process, the cast iron’s properties provide low damping capacity, and excellent wear characteristics.

Please check out our Lagun models, FTV2-F or Megamill MVM-4.

Check us out on Instagram for more posts and videos!

Manufacturer:
Republic Lagun Machine Tool Co
Category:
Mills
REQUEST A QUOTE

SCROLL TO VIEW MORE

Description

Lagun Megamill MVM-2 has features such as a one-shot central lubrication system, infinite speeds up to 4500 RPM, and Electronic Variable Speed (EVS) as an option. The Megamill also utilizes a special high strength, gray cast iron produced by the Meehanite process. As a result of the Meehanite process, the cast iron’s properties provide low damping capacity, and excellent wear characteristics.

Please check out our Lagun models, FTV2-F or Megamill MVM-4.

Check us out on Instagram for more posts and videos!

Features

STANDARD EQUIPMENT:

  • Spindle taper R-8
  • Flood coolant system
  • Hardened & precision ground ways
  • One shot lubrication system
  • Draw bar
  • Operators manual/parts list
  • Basic service tool kit
  • Way covers (rubber type)
  • Base chip pan (standard size)
  • 3/60/220/440 volt electrics.
  • Electronic variable speed (EVS) (Optional)

Specs

  • Megamill MVM-2

  • Table

  • Table size

    50” x 10” (1,270 x 254 mm)

  • T-slots

    3 on 2.5” centers (3 on 64 mm)

  • T-slot size

    5/8” (16 mm)

  • Maximum weight on table

    661 lbs. (300 kg)

  • Travels

  • Table travel X-axis, manual/ with power feed

    35” / 32” (890 / 810 mm)
    (Depending on power feed)

  • Cross travel, Y axis

    16” (406 mm)

  • Knee travel, Z axis

    16” (406 mm)

  • Ram travel

    22.04” (560 mm)

  • Head

  • Main motor

    3 HP (2.24 kW)

  • Mechanical infinite variable speed with (High-Low) manual settings (60 HZ)

    60 to 4,500 RPM. Low (60 to 500 RPM); High (500 to 4,500 RPM).
    (*Optional Electronic Variable Speed- 0 to 4,500)

  • Head swivel (Left to right)

    +/- 90°

  • Head tilt

    +/- 45°

  • Distance, spindle to column

    6.25” to 28” (159 to 719 mm)

  • Distance, spindle to table

    4 to 20” (100 to 506 mm)

  • Quill

  • Power quill feeds

    .0015, .003, .006 in./rev (.038;.076;.015mm/rev)

  • Spindle taper

    R-8 (Opt. #40 NST)

  • Quill diameter

    3.38” (85.73 mm)

  • Quill travel

    5” (127 mm)

Warranty

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:

PARTS@LAGUN.COM

or call

800.421.2105

 

*Applies to domestic sales only.

Accessories

Special electrics

CSA/Underwriters laboratories (UL)

Newall DP700 System

2 or 3 axis digital readout

Acu-Rite M203

2 or 3 axis digital readout

Pneumatic power drawbar

Push button system and can be used on R8 30 taper and 40 taper.

Rotary table- vertical or horizontal

These tables can be mounted vertically or horizontally.

Universal dividing head

This is a geared system that can be driven on table. Travel with indexing plates chuck to be ordered as a option,

Right angle head

Designed to simplify right angle work by reducing the need of special tooling and difficult fixtures. Ideal for cavities & pocket jobs.

Slotting head

Shaping head can perform intricate shapes, extrude dies and complex patterns, can be placed at any vertical or compound angle to the table. It is a must in cases of blind holes. This can be mounted permanently on the ram rear support and be swung 180 to position it over the table for usage.

Steel clamping kit

52 piece kit

Spindle safety guard

with microswitch

Vise

Flame hardened vise with swivel base.

Halogen work light

Powerfeed

Available for X,Y,Z axis

Similar Models