Features

TS– Manual Feed

TSA– Automatic feed (mechanical clutch)

TSE– Automatic feed (Electromagnetic clutch

• Lighting equipment
• Adjustable depth end with ruler in metric
• Automatic tool ejector
• Working table with “T” slots with rotary around the column possibilities. Vertically adjustable table, by pinion and rack and treated surface.
• Base with “T” slots. Treated surface.
• 2 speed motor: 750/1,500 RPM 1/1.5 HP
• CE safety rules, with protection in the working area and the necessary electrical protections
• Maximum drilling capacity in steel of 154.3 lbs (70 kg); 1.26” (32 mm).
• Maximum tapping capacity in steel of 154.3 lbs (70 kg); 1 7/64” (M.28).
• Morse taper No.: 4
• Maximum drilling depth: 6.3” (160 mm)
• Speeds No 8.- Standard range at 50 Hz: 75-150-235-325-470-650-1,050-2,100 RPM
• Speeds No. 8- Standard range at 60 Hz: 90-180-282-390-564-780-1,260-2,520 RPM
• Geared drive with top quality steel gears and arbors treated and grounded.
• Top quality steel main spindle/toothing quill, fully treated and grounded (exterior, interior, grooves and teeth).
• Measuring front rule, with adjustable depth limit and reading index.
• Automatic greasing system of the gear boxes.
• Emergency push button
• Spindle safety micro.
• Coolant system set in the base. (TSR/TSA/TSER models).

R– Coolant System

Specs

• 32-TS / TSR/ TSAR

• Table

• Maximum drilling capacity in steel 154.3 lbs (70 kgs)

  1.26" (32 mm)

• Maximum drilling Capacity in cast iron 200 Br.

  1.38" (35 mm)

• Drilling feed

  Manual / Manual / -

• Main motor

  1/1.5 HP

• Standard speeds 50 Hz. - 750/1500 RPM

  75-150-235-325-470-650-1050-2100

• Standard speeds 60 Hz. - 750/1500 RPM

  90-180-282-390-564-780-1260-2520

• Morse taper no.

  MT 4

Warranty

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at

PARTS@LAGUN.COM

or call

800.421.2105

*Applies to domestic sales only.

Accessories

Frontal wheel for fine sensitive feed

Speed electronic variator

Speed digital reader (for models with variator)

Depth digital reading

Tapping system IR/RS

Automatic tapping system by lead screw

Rotating table

Cycles counter (for models with hydro block)

Reversible fixed table with vice