pixel

This product is used widely in these industries:

MODELUTC-1860

The Republic CNC lathe is a precision horizontal bed lathe equipped with a two-axis CNC control.  It features constant surface speed, a ‘user friendly’ conversational control system, ‘Teach-In (“Do One”) and manual hand wheel control.

Manufacturer:
Republic Lagun CNC
Category:
Lathes

Description

The Republic CNC lathe is a precision horizontal bed lathe equipped with a two-axis CNC control.  It features constant surface speed, a ‘user friendly’ conversational control system, ‘Teach-In (“Do One”) and manual hand wheel control.


Features

Outstanding Features:
  • Tri-way Design, with three (3) V- ways, maintains perfect alignment of carriage on bed and eliminates any twisting.
  • Massive base is 1-piece Meehanite casting (no pedestals or sheet metal). Chip Pan is front removal so machine can be placed against a wall.
  • Extra wide bed provides stability and vibration absorption, stress relieved by annealing. Induction Hardened ways to HS 70-75 and precision ground.
  • Dovetail carriage and cross slide ways are Hardened & Ground then coated with Turcite-b linear anti-friction bearing material hand-scraped to ensure uniform matching surfaces.
  • Headstock gears are hardened and precision ground on Maag or Reishauer grinders for smooth, quiet, and vibration-free running.
  • Unique pressurized headstock automatic lubrication system from a separate electric pump and reservoir provides a constant flow of clean, cool oil to the headstock gears and bearings providing excellent thermal stability and maintaining work piece tolerances.
  • Four matched vee belts are used instead of standard set of three, with a balanced pulley. This provides stable and smooth running.
  • The EVS drive and main drive motor are dynamically balanced to optimize torque/horsepower in both gear ranges. CSS (Constant Surface Speed) is standard.
  • A 3-bearing alloy steel spindle is mounted on opposed Timken taper roller bearings. Spindle nose is cam-lock D1-6 with 2” bar capacity.
  • Special tailstock design with increased throat depth allows carriage to travel past the tailstock center for full length O.D. turning between centers.
  • Manual Operation Control Console slides full length of the centers distance and houses Manual Handwheel Controls, spindle and coolant controls, federate dials, E-stop. Provision can be made for adding controls for options such as Hydraulic Tailstock Quill   Auto Turret Index, etc.
  • The electrical control cabinet is completely sealed to prevent dust, dirt, chips, or coolant from entering and is fan cooled. The transformer and resistor are housed separately, isolated below the control cabinet, to eliminate any heat.

Specs

  • Capacity

  • Swing over bed

    Ø 18.11" (460 mm)

  • Width of bed

    12" (305 mm)

  • Headstock and Main Spindle

  • Spindle nose, internal taper

    Ø 18.11" (460 mm)

  • Spindle bore

    Ø 2.56" (65 mm)

  • Spindle speed

    Infinitely variable

  • Range

    L: 270 ~ 830 RPM
    H: 830 ~ 2500 RPM

  • Cross slide (X-axis) and Carriage (Z-axis)

  • Cross slide travel (X-axis)

    9.05" (230 mm)

  • Longitudinal travel (Z-axis)

    53.15" (1350 mm)

  • Tailstock

  • Quill diameter

    Ø 2.67” (68 mm)

  • Quill travel

    6" (153 mm)

  • Center taper

    MT No. 4

  • Motor

  • Main spindle

    Continuous rated: STD AC 11 HP (7.5 kW)

  • 30 min. rated: STD AC 15 HP (11 kW)

  • Measurements

  • Weight (Net / Gross) Approximations

    5720 lbs / 6820 lbs (2600 kgs / 3100 kgs)

  • Packing sizes

    Length: 132.28" (3360 mm)

  • 83.3" x 92.1" (2115 x 2340 mm)

Warranty

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first.

For parts and service contact our support team at:

[email protected]

or call

800.421.2105

*Applies to domestic sales only.

Accessories