This product is used widely in these industries:

MODELMegamill MVM-2

Lagun Megamill Vertical Knee Mill, MVM-2 with mechanical infinite variable speed head provides full HP at all RPM’s.

Republic Lagun Machine Tool Co



Lagun Megamill Vertical Knee Mill, MVM-2 with mechanical infinite variable speed head provides full HP at all RPM’s.



  • Spindle taper R-8
  • Flood coolant system
  • Hardened & precision ground ways
  • One shot lubrication system
  • Draw bar
  • Operators manual/parts list
  • Basic service tool kit
  • Way covers (rubber type)
  • Base chip pan (standard size)
  • 3/60/220/440 volt electrics.
  • Electronic variable speed (EVS) (Optional)


  • Megamill MVM-2

  • Table

  • Table size

    50” x 10” (1,270 x 254 mm)

  • T-slots

    3 on 2.5” centers (3 on 64 mm)

  • T-slot size

    5/8” (16 mm)

  • Maximum weight on table

    661 lbs. (300 kg)

  • Travels

  • Table travel X-axis, manual/ with power feed

    35” / 32” (890 / 810 mm)
    (Depending on power feed)

  • Cross travel, Y axis

    16” (406 mm)

  • Knee travel, Z axis

    16” (406 mm)

  • Ram travel

    22.04” (560 mm)

  • Head

  • Main motor

    3 HP (2.24 kW)

  • Mechanical infinite variable speed with (High-Low) manual settings (60 HZ)

    60 to 4,500 RPM. Low (60 to 500 RPM); High (500 to 4,500 RPM).
    (*Optional Electronic Variable Speed- 0 to 4,500)

  • Head swivel (Left to right)

    +/- 90°

  • Head tilt

    +/- 45°

  • Distance, spindle to column

    6.25” to 28” (159 to 719 mm)

  • Distance, spindle to table

    4 to 20” (100 to 506 mm)

  • Quill

  • Power quill feeds

    .0015, .003, .006 in./rev (.038;.076;.015mm/rev)

  • Spindle taper

    R-8 (Opt. #40 NST)

  • Quill diameter

    3.38” (85.73 mm)

  • Quill travel

    5” (127 mm)


One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:

[email protected]

or call



*Applies to domestic sales only.


Special electrics

CSA/Underwriters laboratories (UL)

Newall DP700 System

2 or 3 axis digital readout

Acu-Rite M203

2 or 3 axis digital readout

Pneumatic power drawbar

Push button system and can be used on R8 30 taper and 40 taper.

Rotary table- vertical or horizontal

These tables can be mounted vertically or horizontally.

Universal dividing head

This is a geared system that can be driven on table. Travel with indexing plates chuck to be ordered as a option,

Right angle head

Designed to simplify right angle work by reducing the need of special tooling and difficult fixtures. Ideal for cavities & pocket jobs.

Slotting head

Shaping head can perform intricate shapes, extrude dies and complex patterns, can be placed at any vertical or compound angle to the table. It is a must in cases of blind holes. This can be mounted permanently on the ram rear support and be swung 180 to position it over the table for usage.

Steel clamping kit

52 piece kit

Spindle safety guard

with microswitch


Flame hardened vise with swivel base.

Halogen work light


Available for X,Y,Z axis