Features

Outstanding Features
• This Vertical Machining Center weighs 11,023 lbs. (5,000 kg).
• Our design incorporates rectangular square box ways that provide contact over a large surface area for maximum vibration damping and rigidity. The box ways are hardened and ground. They are covered with virtually friction-free Turcite liners on all gibs and way surfaces. And with full length lubrication over the way surfaces it preserves accuracy and extends machine life by eliminating machine stick slip.
• Pre-tensioned ball lead screws (supported both ends)
• High table load capacity
• Box ways with Increased ft.-lbs. peak spindle torque
• High torque & high thrust axis motors with optimal acceleration allowing for impressive table rapid traverse.
• Every machine is laser verified, and ball bar tested total operating envelope
• Every machine is U.L. approved.
• 24-hour service response

Specs

• VMC 3320B

• Capacity

• X axis travel

  33.5” (850 mm)

• Y axis travel

  20.1” (510 mm)

• Z axis travel

  22” (560 mm)

• Max. load (uniform distribution)

  1,653 lb (750 kg)

• Table

• Table size (X) x (Y)

  39.4" x 19.7” (1000 x 500 mm)

• T-slots (No./Width/Span)

  Five 0.7” x 3.9” (18 x 100 mm)

• Spindle Head

• Spindle continuous power

  15 HP (11 kW)

• Spindle 15 Min Power

  20 HP (15 kW)

• Spindle speed (RPM)

  Belt Drive 8,000 RPM (Opt. 10,000 RPM)

• Taper

  CAT 40

• Automatic Arm Type

• Tool storage capacity

  Arm Type 24, CAT 40/ (Opt. chain type)

• General

• Machine length

  114.2” (2,900 mm)

• Machine width/depth

  95.3” (2,420 mm)

• Machine height

  112.2” (2,850 mm)

• Machine net Weight

  11,023 lb (5,000 kg)

Warranty

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:

PARTS@LAGUN.COM

or call

800.421.2105

*Applies to domestic sales only.

Accessories

Spindle belt type chip conveyor

Electrical Box

Swivel Panel