Republic Lagun Machine Tool Co.

Power One Series Lathes

The Power Series big bore heavy duty manual lathes are dependable and built for virtually every industry application. These quality lathes range from 35” to 50” swings, distance between centers of up to 480”, and a standard 20hp motor.

Get a Quote Download Brochure
Monolithic Bed
Floor
Type
Casting
3 Bedway Design
Spindle Steel Spindle

Specifications

Imperial Metric
Table
Swing over bed35 - 50"880 - 1,275 mm
Swing over cross slide24 - 40"610 - 1,010 mm
Swing over gapSwing over gap: 523/4 - 69"1,340 - 1,740 mm
Length of gap from headstock24"600 mm
Center distance60 - 480"1,500 - 12,000 mm
Bed width / lower way22" / 26"560 / 660 mm
Headstock
Spindle bore, nose, and speed rangeB6 std: 6.02", A2-11, 7 - 700 RPM, 18 speedsB6 std: (153 mm), A2-11, 7 - 700 RPM, 18 speeds
Spindle speed:18 Steps18 Steps
Main motor standard20 Hp(14)20 Hp(14)
Carriage & Apron
Cross slide travel26.37"670 mm
Compound slide travel17.71"450 mm
Travel, Threads & Feeds
Leadscrew pitch; TPI(mm)2 TPI(12 mm)
Thread; TPI(kind); range & (No):1/2 - 28"(60)1 - 56 mm(60)
Modular thread; MOD(kind); range & (No)0.25 - 14(60)0.25 - 14(60)
Diametral thread; DP(kind); range & (No)2 - 112(60)2 - 112(60)
Longitudinal feed range:0.0018 to 0.1 in/rev 0.045~2.55 mm/rev
Cross feed range0.0009 to 0.05 in/rev 0.022 to 1.28 mm/rev
Rapid feeds, longitudinal79 in/min2000 mm/min
Rapid feeds, cross50 in/min1,270 mm/min
Tailstock (2-speed)
Diameter of quill4 1/2"Ø 115 mm
Quill diameter7 7/8"Ø 200 mm
Quill travel, 2-speed11 3/4"Ø 300 mm
Quill speed ratios1:1 & 4:11:1 & 4:1
CenterMT#6MT#6
Bearing surface on ways19 3/4"500 mm

Videos

No videos available.

Images

No images available.

Certifications

No Certs available.

Accessories


Click an image below to enlarge.

Product Variations


View Comparison Clear Comparison