Republic Lagun Machine Tool ATV-914-HC-ET Ultra Precision Lathe

OUTSTANDING FEATURES

  • Extreme accuracy, high precision pre-loaded angular contact ball bearing spindle, permanently lubricated.
  • Guaranteed spindle runout of 50 millionths of an inch, in a controlled environment.
  • Digital or Electronic Threading makes threading on a chucker lathe easier than ever. The Touch screen LCD allows to select thread pitch. Choose target thread per inch or mm pitch on screen, set spindle rpm and start threading just like on conventional lathes. Simple no threading attachment. No threading gear box. Less moving parts, quiet operation; maintenance free design. Servo driven design. An internal servo motor drives the leadscrew so the feed rate is synchronized to spindle rpm’s. (see Note #1 bellow)
  • Electronic Variable Speed (EVS) drive providing spindle speeds 50~4,000 RPM, eliminating vibration associated with belt vari-drive systems.
  • Hardened and precision ground alloy tool steel bedways.
  • Hardened and precision ground spindle.
  • 5C lever type ball bearing collet closer for fast-lever collet chucking with a single movement.
  • One-piece headstock and bed construction.
  • Control console with load meter, digital display of spindle RPM, speed selection potentiometer, forward-stop-reverse switch and emergency stop.
  • The control console is integrated with a Digital Read Out or (DRO) with touch screen functions for an all in one versatile machine. With linear Mitutoyo scales for X and Z axis feedback.
  • Pre-loaded ball bearing 8-station indexing turret with locking lever.
  • Full bearing carriage with Turcite-B anti-friction material and precision gears and clutches, completely enclosed in a special oil bath system.
  • Independent electric variable feeds to carriage and cross slide by D.C. Motor. Feed rates can be changed instantly at any time, even while cutting.
  • Easy reading dial for cross feed turret with pointers and easy to read, smooth carriage handwheel.
  • Carriage slide and bed ways are pressure lubricated to insure long life.
READ MORE

DESCRIPTION

Republic Lagun presents the American Turnmaster ATV-914-HC-ET Ultra Precision Manual Lathe. This lathe is a high speed, high precision manual chucker with electronic threading and an easy to read digital read out (DRO). This user friendly chucker comes furnished with an 8-station indexing tool turret for quickly changing tools on complicated job setups. The ATV-914-HC-ET ultra precision lathe also has 8-position carriage stops that can be setup to simplify multiple repetitive tool feeds. This chucker has no threading attachment, no threading gearbox, less moving parts, with quiet operations and a maintenance free design all for your convenience.

*Note: Interested in other Ultra Precision Lathes? Please take a look at our ATV-900-SO or ATV-910-FL models. Or browse all manual lathes offered by Republic Lagun here.

Check us out on Instagram for more posts and videos!

SPECIFICATIONS

FeaturesAT-618-TRAT-618-ETATV-900-SOATV-910-FLAT-914-HCATV-916-TM
Swing over bed ways11”(280 mm)11”(280 mm)9” (229 mm)9” (229 mm)13” (330 mm)9” (229 mm)
Swing over carriage9”(230 mm)9”(230 mm) 15” (380 mm)
Swing over cross slide6”(152 mm)6”(152 mm) 3.75” (95 mm)
Distance between centers18”(457 mm18”(457 mm)
Length of bed36”(915 mm)36”(915 mm) 36”(915 mm) 10”(254 mm)14”(355 mm)36”(915 mm)
Headstock
Spindle nose diameter 2.18”(55.6 mm)2.18”(55.6 mm)2.18”(55.5 mm)
Spindle speeds, numberInfinitely variableInfinitely variableInfinitely variableInfinitely variableInfinitely variable
Spindle speed range0 – 4,000 RPM50 – 4,000 RPM0 – 4,000 RPM0 – 4,000 RPM0 – 4,000 RPM0 – 4,000 RPM
Spindle nose, ID/OD, 5C10° / 4°10° / 4°10° / 4°10° / 4°10° / 2.18” / 10 RH (55.5 mm)10° / 4°
Spindle nose, outside taper
Capacity
5C Round collets1.06”(27 mm)1.06”(27 mm)1.06”(27 mm)1.06”(27 mm)1.06”(27 mm)1.06”(27 mm)
5C Hex collets.86”(22 mm).86”(22 mm).87”(22 mm).87”(22 mm).87”(22 mm).86”(22 mm)
5C Square collets.74”(19 mm.74”(19 mm.75” (19 mm).75” (19 mm).74”(19 mm
with expanding collets3”(76 mm)3”(76 mm)3”(76 mm)3”(76 mm)3”(76 mm)3”(76 mm)
with step chucks1.06 to 6”(27 to 152 mm)1.06 to 6”(27 to 152 mm)1.06(27mm)6”(152.4 mm)1.06 to 6”(27 to 152 mm)1.06 to 6”(27 to 152 mm)
with jaw chucks6”(150 mm)6”(150 mm)6”(150 mm)5”(127 mm)6”(150 mm)
Travels, Feeds and Threads
Cross slide travel6”(152 mm)6”(152 mm)4.5”(114 mm)
Compound slide travel3” (76 mm)3” (76 mm)4.25” – 5.5”(108 -140 mm)
Quick – action compound slide travel0.1”(2.54 mm)0.1”(2.54 mm)
Carriage variable feed range.31” to 7”(8 to 178 mm).31” to 7”(8 to 178 mm).25” – 10”(6 – 250 mm)
Cross slide variable feed range.18” to 4”(5 to 102 mm).18” to 4”(5 to 102 mm)1.03” – 6.25”(9 – 160 mm)
Leadscrew, pitch x diameter8 TPI x 1” (8 TPI x 25.4 mm)8 TPI x 1” (8 TPI x 25.4 mm)
Inch thread range (36)11 – 108 TPI3.17 to 500 TPI (0.55 – 6.55 mm
Metric thread range (36).01” – .11”(0.275 – 2.7 mm)
Tailstock
Tailstock spindle diameter1.35”(35 mm)1.35”(35 mm)1.35”(35 mm)
Spindle taperNo. 2 MTNo. 2 MTNo. 2 MT
Spindle travel3.75”(95 mm)3.75”(95 mm)3.75”(95 mm)
Electrics
Main drive, EVS, 3/60/220 volt3 HP(2.237 Kw)3 HP(2.237 Kw)3 HP(2.237 Kw)5 HP EVS (3.7 Kw)
Coolant pump motor0.25 HP(0.19 Kw)0.125 HP, 220V, 3 Ph.12 HP (0.1 Kw).125 HP (0.9 Kw)
D.C. feed motor 110 volt75 watts70 watts
Weight
Net weight, approximate2310 lb (1050 kg)2420 / 2640 lb (1100/1200 kg)992 /1366 lb (450 /620 kg)660 lb(300 kg)2200 lb(1000 kg)1000 lb (455 kg)
Machine Dimensions73 x 30 x 67”(1850 x 750 x 1700 mm)74 x 34 x 74” (2000 x 850 x 1900 mm)74 x 34 x 74” (2000 x 850 x 1900 mm)36 x 36 x 55”(900 x 900 x 1400 mm)73 x 30 x 67”(1850 x 750 x 1700 mm)
SEE MORE SPECS

* All Product Specs are Subject to Change at Any Time

One year, from date of installation.