Skip to content

Republic Lagun Machine Tool Millmatic III CNC Vertical Knee Mills with Three Axes

OUTSTANDING FEATURES

  • 5 HP spindle drive
  • Flood coolant system
  • Table and saddle locks
  • All high precision ball screws X, Y, and Z axis
  • 11 1/2 (292 mm) wide knee
  • R8 spindle taper
  • 23″ (584 mm) saddle
Hide

DESCRIPTION

Lagun’s Millmatic III CNC Vertical Knee Mills have the capacity to function also as a CNC machine, allowing to machine up to 3 axes. This series of CNC Vertical Knee Mills provides the ideal solution for the typical combination of single shot work, prototype, one-piece or short run production. The Millmatic III is a member of the Lagun FTV family, featuring 50 years of reliable service.

*Note: Looking for more Vertical Knee Mills? Please take a look at our Mega 4 Volume and Millmatic II mills. Or browse all our Mills here.

Check us out on Instagram for more posts and videos!

SPECIFICATIONS

Mill Model:FTV-2FMVM-1MVM-2MVM-4Millimatic IIMillimatic IIIMega 4 SurfaceMega 4 Volume
Table Size55.25" x 10"49" x 9"50" x 10"58" x 12"55.25" x 10"55.25" x 10"58" x 11"58" x 11"
Weight Cap:750 lb400 lb661 lb1,200 lb750 lb750 lb1,200 lb1,200 lb
X Travel38" (34.5" w/PF)30"35" (32" w/PF)39.37"36"36"37.38"41"
Y Travel15.98"12"16"15.35"15.25"15.25"14.6"14.5"
Z Travel15.98"16"16"15.75"16"16"15.75"15.75"
Ram Travel22.44"15.35"22.04"20"22.2"22.2"20"20"
Motor HP5 HP3 HP3 HP5 HP5 HP5 HP5 HP5 HP
RPM Range55-4,25060-4,20060-4,50060-4,30055-4,25055-4,25060-4,30060-4,300
Drilling Cap1.25"
Milling Cap4 Cu in/min
Boring RangeUp to 8"
Spindle TaperR-8R-8R-8#40 NSTR-8R-8#40 NST#40 NST
Quill Diameter3.38"3.38"3.38"4.13"3.38"3.38"4.13"4.13"
Quill Travel5"5"5"5"5"5"5"4.25"
CNC?Non CNCNon CNCNon CNCNon CNCCNCCNCCNCCNC
CNC AxisN/AN/AN/AN/A2323
Mill Model:FTV-2FMVM-1MVM-2MVM-4Millimatic IIMillimatic IIIMega 4 SurfaceMega 4 Volume
Table Size55.25″ x 10″49″ x 9″50″ x 10″58″ x 12″55.25″ x 10″55.25″ x 10″58″ x 11″58″ x 11″
Weight Cap:750 lb400 lb661 lb1,200 lb750 lb750 lb1,200 lb1,200 lb
X Travel38″ (34.5″ w/PF)30″35″ (32″ w/PF)39.37″36″36″37.38″41″
Y Travel15.98″12″16″15.35″15.25″15.25″14.6″14.5″
Z Travel15.98″16″16″15.75″16″16″15.75″15.75″
Ram Travel22.44″15.35″22.04″20″22.2″22.2″20″20″
Motor HP5 HP3 HP3 HP5 HP5 HP5 HP5 HP5 HP
RPM Range55-4,25060-4,20060-4,50060-4,30055-4,25055-4,25060-4,30060-4,300
Drilling Cap1.25″
Milling Cap4 Cu in/min
Boring RangeUp to 8″
Spindle TaperR-8R-8R-8#40 NSTR-8R-8#40 NST#40 NST
Quill Diameter3.38″3.38″3.38″4.13″3.38″3.38″4.13″4.13″
Quill Travel5″5″5″5″5″5″5″4.25″
CNC?Non CNCNon CNCNon CNCNon CNCCNCCNCCNCCNC
CNC AxisN/AN/AN/AN/A2323
Mill Model:FTV-2FMVM-1MVM-2MVM-4Millimatic IIMillimatic IIIMega 4 SurfaceMega 4 Volume
Table Size55.25″ x 10″49″ x 9″50″ x 10″58″ x 12″55.25″ x 10″55.25″ x 10″58″ x 11″58″ x 11″
Weight Cap:750 lb400 lb661 lb1,200 lb750 lb750 lb1,200 lb1,200 lb
X Travel38″ (34.5″ w/PF)30″35″ (32″ w/PF)39.37″36″36″37.38″41″
Y Travel15.98″12″16″15.35″15.25″15.25″14.6″14.5″
Z Travel15.98″16″16″15.75″16″16″15.75″15.75″
Ram Travel22.44″15.35″22.04″20″22.2″22.2″20″20″
Motor HP5 HP3 HP3 HP5 HP5 HP5 HP5 HP5 HP
RPM Range55-4,25060-4,20060-4,50060-4,30055-4,25055-4,25060-4,30060-4,300
Drilling Cap1.25″
Milling Cap4 Cu in/min
Boring RangeUp to 8″
Spindle TaperR-8R-8R-8#40 NSTR-8R-8#40 NST#40 NST
Quill Diameter3.38″3.38″3.38″4.13″3.38″3.38″4.13″4.13″
Quill Travel5″5″5″5″5″5″5″4.25″
CNC?Non CNCNon CNCNon CNCNon CNCCNCCNCCNCCNC
CNC AxisN/AN/AN/AN/A2323
Hide

* All Product Specs are Subject to Change at Any Time

One year or 2,000 hours from date of installation, (single shifting) whichever occurs first. For parts and service contact our support team at:

PARTS@LAGUN.COM

or call

800.421.2105

 

*Applies to domestic sales only.

RELATED PRODUCTS