American Turnmaster Power Series One 35×160 with 9″ Bore SN#:08120677

Republic Lagun’s American Turnmaster Power One 35” series lathe.  The American Turnmaster “Power One” series provides superior craftsmanship and outstanding performance.

Standard Equipment:

  • 6 way rapid traverse
  • Top slide with auto geared feed for tapers
  • Heavy duty square tool post
  • 2-speed tailstock
  • Automatic lubrication to ways and screws
  • Flood coolant system
  • Halogen work light

Optional Items Included:

9.0” (230mm) Spindle Bore, 18 speeds 16~700 RPM
30 hp motor
Hydraulic taper Attachment (Full Center Distance range). (“Hydraulic taper” and “full length profile cutter” will need to follow a template).
Rear Chuck Adapter Plate 9” (230mm) Bore, A2-15
POWER ONE 35 X 120 with 8″ bore SN#: 13091120

Republic Lagun’s American Turnmaster Power Series Lathe with 35″ swing and 120″ between centers and special 8″ bore.

Standard Equipment:

  • 6 way rapid traverse
  • Top slide with auto geared feed for tapers
  • Front chuck cover with limit switch
  • Heavy duty square tool post
  • 2-speed tailstock
  • Automatic lubrication to ways and screws
  • Flood coolant system
  • Halogen work light
  • One dead center, MT #6
  • Follow type splash guard
Republic 1440 In Stock

Standard Equipment

  • Foot brake
  • Thread chasing dial
  • Square 4 position tool post
  • Full length rear splash guard
  • Chip and coolant tray
  • Two MT #4 centers
  • Service tools & manuals
  • Inch/metric dials on compound and cross
  • American Turnmaster 1550 In Stock

    Standard Equipment

  • Chip and coolant tray
  • Foot brake
  • Full length rear splash guard
  • Compound protection guard (without limit switch)
  • Manual Indexing Square 4-position tool post
  • Back Plate (to mount plain back 3 or 4 jaw chuck or fixture plate; dog or face plate)
  • Two (2) No. 4 MT centers and main spindle reduction sleeve
  • Matrix disk clutch
  • Lead screw protection cover
  • Halogen work light
  • Operator protection guard compound mounted
  • Tool box and manuals
  • Leveling pads and bolts
  • Threading dial
  • Inch/metric dials on compound and cross slide(direct readings)
  • Tailstock quill with tang
  • Electrics 220/440 V, 3 phase, 60 Hz (other options available)
  • Coolant system
  • American Turnmaster 1340

    Standard Equipment

  • Chip and coolant tray
  • Foot brake
  • Full length rear splash guard
  • Compound protection guard (without limit switch)
  • Manual Indexing Square 4-position tool post
  • Back Plate (to mount plain back 3 or 4 jaw chuck or fixture plate; dog or face plate)
  • Two (2) No. 3 MT centers and main spindle reduction sleeve
  • Lead screw protection cover
  • Halogen work light
  • Operator protection guard compound mounted
  • Tool box and manuals
  • Leveling pads and bolts
  • Threading dial
  • Inch/metric dual dials on cross slide; compound & tailstock
  • Electrics 220V (STD) /440V (OPTIONAL), 3 phase, 60 Hz (other options available)
  • Flood Coolant system
  • Republic LL-ST-1440 SN#57907

    Standard Equipment
    • ASA Cam-Lock Spindle Nose
    • Push Button Jog
    • Inch/Metric Dual Dials
    • Rear Splash Guard
    • Foot Brake (Electronic disc)
    • Thread Chasing Dial
    • Coolant Pump & piping
    • Chip Collector Tray
    • Square Tool Post
    • (2) Dead centers & headstock Sleeve

    Liberty LL-ST-20/4x 60 SN#53433

    Standard Equipment
    • ASA spindle Nose
    • Push Button Jog
    • Inch/Metric Dual Dials
    • Rear Splash Guard
    • Foot Operated Electronic Disc Brake
    • Thread Chasing Dial
    • Coolant Pump & piping
    • Chip Collector Tray
    • Square Tool Post
    • (2) Dead centers & headstock Sleeve
    • Centralized manual lubrication of carriage & cross slide
    • Complete 3/60/220/440 volt electrics including E-stop.
    • Service Tools and Operators Manual/Parts List
    • Soft-Start: to prevent damage to spindle bearings, pulley, and belts. Spindle starts slower to prevent shock to drive components.

    FTV-2F Vertical Milling Machine
    FTV-2F Vertical Knee Mill

    This dependable vertical knee mill was designed by Lagun for maximum accuracy and minimal downtime. The FTV-2F vertical milling machine comes standard with a powerful 5 HP motor and is available with an optional electronic variable speed (EVS) head. It has and continues to be the “go to” machine for jig work and mold applications.

    Megamill Vertical Mill
    Mega Mill

    The Megamill vertical mill by Republic Lagun Machine Tool Co.  is expertly designed with an extra long saddle, high precision ball screws, and a full power feed.

    Geminis GHT-5-G2-1000

    Republic Lagun- Geminis vast experience in the machine tool sector together with the cooperation of the R&D department of its Integral Technological Center have resulted in a new generation of UNIVERSAL TURNING CENTERS of excellent quality, great performance, accuracy, flexibility and high output.
    SN:25012

    View Comparison Clear Comparison