Tri-way Design, with three (3) Vee ways, maintains perfect alignment of carriage on bed and eliminates any twisting.
Massive base is 1-piece Meehanite casting (no pedestals or sheet metal). Chip Pan is front removal so machine can be placed against a wall.
Extra wide bed provides stability and vibration absorption, stress relieved by annealing. Induction Hardened ways to HS 70-75 and precision ground.
Dovetail carriage and cross slide ways are Hardened & Ground then coated with Turcite-b linear anti-friction bearing material hand-scraped to ensure uniform matching surfaces.
Headstock gears are hardened and precision ground on Maag or Reishauer grinders for smooth, quiet, and vibration-free running.
Unique pressurized headstock automatic lubrication system from a separate electric pump and reservoir provides a constant flow of clean, cool oil to the headstock gears and bearings providing excellent thermal stability and maintaining work piece tolerances.
Four matched vee belts are used instead of standard set of three, with a balanced pulley. This provides stable and smooth running.
The EVS drive and main drive motor are dynamically balanced to optimize torque/horsepower in both gear ranges. CSS (Constant Surface Speed) is standard.
A 3-bearing alloy steel spindle is mounted on opposed Timken taper roller bearings. Spindle nose is cam-lock D1-6 with 2” bar capacity.
Special tailstock design with increased throat depth allows carriage to travel past the tailstock center for full length O.D. turning between centers.
Manual Operation Control Console slides full length of the centers distance and houses Manual Handwheel Controls, spindle and coolant controls, federate dials, E-stop. Provision can be made for adding controls for options such as Hydraulic Tailstock Quill Auto Turret Index, etc.
The electrical control cabinet is completely sealed to prevent dust, dirt, chips, or coolant from entering and is fan cooled. The transformer and resistor are housed separately, isolated below the control cabinet, to eliminate any heat.
Swing over the bed
16.14" (410 mm)
Distance between centers
55" (1400 mm)
Max working Dia:
4 way tool post
Hyd. P8 turret
Spindle nose, standard
Camlock D1-6 or Optional ASA A1-6
2.066” (52.5 mm)
Spindle speeds, two gear ranges
25~3000 RPM (Pneumatic Auto-Shift)
Main spindle motor -Digital Drive
10 HP (7.5 Kw) / 30 min rated 15HP (11Kw)
2.283” (58 mm)
# 4 MT
5.5” (140 mm)
6062 lb (2750Kg)
117” (2980 mm)
80” (2030 mm)
87" (2200 mm)
One year or 2,000 hours from date of installation, (single shifting) whichever occurs first.
For parts and service contact our support team at:
Lagun Engineering has a wide variety of solutions for numerous industries and businesses. From the small garage machinist to the aerospace, medical and defense industries, Lagun delivers a unmatched quality and precision.